EN
31
MasterPage: Advan_Heading0_Right
SYSTEM
Each setting is linked with “
s
SYSTEM”, which appears
when the Power Switch is set to “
M
”.
●
The parameters are the same as in the description on
page 29.
VIDEO DISPLAY
The “
n
” (VIDEO DISPLAY) settings are effective only for
video playback except “BRIGHT” and “AUX MIC”.
●
The parameters (except “OFF” in ON SCREEN settings)
are the same as in the description (CAMERA DISPLAY) on
page 29.
[ ]
= Factory-preset
pg. 13, “Brightness Adjustment Of The Display”
When set to “OFF”, the camcorder’s display disappears.
When set to “AUTO”, the date/time are displayed in the
following cases:
●
When playback starts. The camcorder displays the date/
time when scenes are recorded.
●
When the date is changed during playback.
BRIGHT
ON SCREEN
OFF
/
[LCD]
/
LCD/TV
DATE/TIME
[OFF]
/
AUTO
/
ON
TIME CODE
[OFF]
/
ON
AUX MIC
OFF
/
[ON]
FEATURES FOR RECORDING
LED Light can be used to brighten the subject in the dark
place during video recording or D.S.C. shooting.
1
Press
LIGHT
repeatedly to change the setting.
OFF
: Turns off the light.
ON
: The light is on always. (
appears.)
AUTO
: The light turns on automatically when dark.
(
appears.)
2
Press the Recording Start/Stop Button to start video
recording or
SNAPSHOT
to shoot a still image.
NOTES:
●
Be careful not to point the LED Light directly to eyes.
●
If the light does not reach the subject, the Night-Alive
function will be activated, and makes it possible to shoot
the subject brighter.
●
There is a difference in the brightness of the images shot
between the center area which is illuminated by the LED
Light and the surrounding areas (which will be darker).
●
Since subjects are shot at a reduced shutter speed when
the LED Light setting is “ON”, they will appear slightly
blurred.
LED Light
BA
CK
LI
G
H
T
FOCUS
L
I
G
H
T
N
IG
H
T
SET
SNAPSHOT
LIGHT
LED Light
Recording Start/Stop Button
GR-DX97US.book Page 31 Monday, February 9, 2004 2:28 PM
