Masterpage:Right+
EN
31
Filename [DVM70S_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Page 31Friday, 6 May 2005 12:06
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a program (DVD-RAM,
DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/
SVCD and Audio CD).
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
D E
to select
A
j9
B
, then press
ENTER
. The pop-up
window appears under the selected item.
3
Press the
number keys
to enter the time, then press
ENTER
.
Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
If you have specified a wrong selection,
Press
RETURN
on the remote control and repeat the above
procedures from step
2
.
To clear the on-screen bar
Press
ON SCREEN.
NOTES:
●
When
A
7
B
is displayed on the TV screen in step
3
, you have
selected a point that exceeds the recording time of the disc.
●
Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases,
A
7
B
is displayed on the TV screen as well.
●
This function is not possible for a Video CD/SVCD with PBC
function.
Simulated Surround Effect
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your 2-
channel stereo system.
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
D E
to select
A
B
, then press
ENTER
.
●
A
3D-ON
B
appears above the selected item and Simulated
Surround Effect is activated.
●
Each time you press
ENTER
,
A
3D-ON
B
appears and disappears
alternately.
To clear the on-screen bar
Press
ON SCREEN
.
To cancel the simulated surround effect
Press
ENTER
to clear
A
3D-ON
B
from the screen.
NOTES:
●
Simulated Surround Effect works correctly only when playing
back a title recorded in multichannels.
●
Simulated Surround Effect does not affect the DVD VIDEO
bitstream signal from the [DIGITAL AUDIO OUT] connectors.
●
When Simulated Surround Effect is activated, the settings of
A
ANALOG AUDIO OUT
B
and
A
D. RANGE CONTROL
B
are
disabled. (
A
pg. 70)
●
Simulated Surround Effect cannot be activated under the
following conditions:
●
When the HDD deck is in the recording mode.
●
When the HDD or DVD deck is in the timer standby mode.
●
When a disc containing both the Dolby Digital 5.1CH and 2CH
sound formats is playing back a scene that is not in the 5.1CH
sound format.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
D E
to select
A
B
, then press
ENTER
. The pop-up
window appears under the selected item.
3
Press
F G
to select the desired option, then press
ENTER
.
NORMAL
:
Normally select this option.
CINEMA
:
Suitable for a movie disc, etc.
SHARP
:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-colored surfaces such as cartoons.
SOFT
:
Select this option when too much noise appears.
To clear the on-screen bar
Press
ON SCREEN.
T
ENTER
I
S
0-9
ON SCREEN
RETURN
CLEAR
CANCEL
FGDE
CABLE/DBS
DVD
TV
DVD-
VIDEO
CHAPTER 99
EACH 0:00
TITLE 99
CINEMA AUTO
Press 1
Press 2
Press 0
Press 5
TIME
TIME
TIME
TIME
TIME
DVD-
VIDEO
CHAPTER 99
EACH 0:00
TITLE 99
3D-ON CINEMA
AUTO
DVD-
VIDEO
CHAPTER 99
EACH 0:00
TITLE 99
CINEMA AUTO
DVM70S_00.book Page 31 Friday, May 6, 2005 12:06 PM
