EN
65
NOTES:
●
Refer to “SOFTWARE INSTALLATION AND USB (or
PC) CONNECTION GUIDE” for the installation of the
bundled software and drivers.
●
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
墌
pg. 9).
●
Never connect the USB or PC connection cable and
the DV cable simultaneously to the camcorder.
Connect only the cable you wish to use to the
camcorder.
●
If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not enter the
USB mode.
●
The date/time information cannot be captured into the
PC.
●
Refer to the instruction manuals of the PC and
Software.
●
The still images can also be transferred to a PC with a
DV connector-equipped capture board.
●
When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable
depending on the type of DV connector (4 or 6 pins)
on the PC, or use the DV cable provided with the
capture board.
●
The system may not work properly depending on the
PC or capture board you are using.
Connection To A Personal Computer
[A] Using USB or PC connection cable
This camcorder can transfer still images to a PC by
using the provided software.
[B] Using DV cable
It is also possible to transfer still images to a PC with
a DV connector by using software equipped with the
PC or commercially available software.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3
For GR-DVL720/DVL520 Owners:
If you are using the USB connection, set the VIDEO/
MEMORY switch to “MEMORY”.
4
Turn the camcorder’s Power Switch to “PLAY”
while pressing down the Lock Button located on the
switch and turn on the PC.
• Refer to the instruction manual of the software on
how to transfer a still image to the PC.
5
When finished, turn off the PC first, then the
camcorder.
For GR-DVL720/DVL520 Owners:
“ACCESSING FILES” appears on the LCD monitor
while the PC is accessing data in the camcorder or
the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while “AC-
CESSING FILES” is displayed on the LCD monitor
since this can result in product damage.
To DV
IN/OUT
To USB
connector
DV cable (optional)
To DV
connector
USB cable
(provided)
To USB
Power Switch
PC with DV
connector
PC
Core filter
VIDEO/MEMORY
Switch (GR-DVL720/DVL520 only;
open the LCD monitor to access this switch.)
OR
Core filter
To RS-232C
PC connection cable
(provided)
To PC
GR-DVL320 only
[A] Using USB or PC connection cable
[B] Using DV cable
SYSTEM CONNECTIONS
GR-DVL720/DVL520 only
