JVC DT-V1900CG, Инструкция по эксплуатации

Страница: 7 / 31

Video input/output terminals
Input (IN) and output (OUT) terminals for component
(colour difference) or RGB signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select component signal : press INPUT SELECT A/C/E
button
Select RGB signal : press INPUT SELECT B/D/F
button
Synchronised signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical,
horizontal or complex synchronised signals.
Function differs depends on the SYNC SELECT setting in
the FUNCTION SETTING setup menu. For details, refer to
Page 15.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Audio input/output terminals
Input (IN) and output (OUT) terminals for audio signals.
The IN and OUT terminals are bridge-connected.
Connection terminal (to a Multi-Format Monitor)
Attach to the connection terminal of your Multi-Format
Monitor.
1
CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL)
䡵
COMPONENT/RGB INPUT CARD (OPTIONAL:
IF-C01COMG)
䡵
Compatible signal formats:
NTSC (3.58 MHz), PAL (4.43 MHz), black-and-white
(50 Hz/60 Hz)
* You can select “AUTO” (automatic selection), “NTSC” or
“PAL” in SETUP MENU when switching NTSC or PAL.
Normally select AUTO. However, if the input signal is
unstable, select NTSC or PAL.
B/P
B
/B-Y
G / Y
OUT IN
OUT IN
R/P
R
/B-Y
OUT IN
VD
OUT IN
HD/C
S
OUT IN
OUT IN
AUDIO
OUT IN
1
2
3
4
䡵
VIDEO INPUT CARD (OPTIONAL: IF-C01PNG)
VIDEO 1
OUT IN
AUDIO 2
AUDIO 1
OUT IN
VIDEO 2
OUT
Y/C IN
IN
OUT IN
EXT.SYNC
1
2
3
4
5
䡵
Compatible signal formats:
480/60i, 576/50i, 576/50p, 480/60p, 720/60p, 1035/60i,
1080/50i, 1080/60i, 1080/24psF
Video input/output terminals
Input (IN) and output (OUT) terminals for video signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select VIDEO 1 : press INPUT SELECT A/C/E button
Select VIDEO 2 : press INPUT SELECT B/D/F button
S-video input terminal
Input terminal for the S-video signal.
When an S-video signal is input to this terminal and a
video signal is input to VIDEO 2, the S-video signal has
priority over the video signal.
When choosing the S-video input, press INPUT SELECT
B/D/F button.
Synchronised signal input/output terminals
Input (IN) and output (OUT) terminals for the complex
synchronised signals.
Function differs depends on the SYNC SELECT setting in
the FUNCTION SETTING setup menu. For details, refer to
Page 15.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Audio input/output terminals
Input (IN) and output (OUT) terminals for audio signals
corresponding to VIDEO 1 and VIDEO 2. The IN and
OUT terminals are bridge-connected.
Connection terminal (to a Multi-Format Monitor)
Attach to the connection terminal of your Multi-Format
Monitor.
1
2
3
4
2
3
4
5
6
LCT1116-001A(EN) 02.1.29, 2:53 PM 8