ENGLISH
Problems
Irregular colour
Wrong picture
position, wrong
picture size
Front panel
buttons and
knobs do not
function
Points to be checked
Is the monitor placed or moved close to
a speaker or any other device
incorporating a magnet?
Has the position of the monitor been
changed with the power on?
Has the picture position, size or
distortion been changed?
Have the UNDER SCAN or ASPECT
button been pressed?
Has the CONTROL LOCK function
been set to ON?
Has the monitor’s setting been
changed to enable control from an
external unit via the REMOTE
terminals?
Measures (Remedy)
Move the device away from the monitor.
Press the DEGAUSS button on the front panel to
degauss the screen.
When degaussing, wait more than 30 minutes for
maximum effect.
Adjust the picture size (H SIZE, V SIZE) or
position (H. POSITION, V. POSITION) in the
[SIZE/POSI. ADJ.] item in the <SETUP MENU>
screen.
Adjust the picture distortion (PINCUSHION, PIN.
BALANCE, TRAPEZOID and PARALLELOGRAM)
in the [DISTORTION ADJ.] item in the <SETUP
MENU> screen.
It may not be possible to expand the picture due
to the selected input mode. In this case,
adjustment is impossible.
When the UNDER SCAN or ASPECT button is
lit, press each button to invalidate each setting.
Set the CONTROL LOCK function to OFF.
Change the setting of the external control to
control the monitor locally.
The following are not malfunctions:
●
You may see two horizontal lines on the monitor. They are
the shadows of the “damper lines” that are necessary for
composing the monitor. These lines are not a malfunction.
●
When a bright still image (such as a white cloth) is
displayed for a long period, it may appear to be coloured.
This is due to the structure of the cathode ray tube and
will disappear when another image is displayed.
●
You may sometimes experience a mild electric shock
when you touch the picture tube. This phenomenon is due
to a normal buildup of static electricity on the CRT and is
not harmful.
●
The monitor emits a strange sound when the room
temperature changes suddenly. This is only a problem if
an abnormality appears on the screen as well.
●
If two or more monitors are operated next to each other,
their images may shake or be distorted. This phenomenon
is due to mutual interference; it is not a malfunction. Move
the monitors away from each other until the interference
disappears or turn the power off on any monitor that is not
being used.
SLOT 1
A
B
DEGAUSS
MENU
SCREENS
CHECK
ASPECT
AREA
MARKER
UNDER
SCAN
PULSE
CROSS
COLOR
OFF
SLOT 2
C
D
SLOT 3
POWER
E
F
INPUT SELECT
VOLUME
MUTING
Reference
pages
4
18
4, 5
19
20, 21
Damper line
23
When black vertical lines appear on the screen
Black vertical lines may appear on the screen if the aperture grill is tilted as a result of being shaken or jolted during shipment.
In this case, try tapping the monitor on the side. If this does get rid of the lines, follow the procedure below.
1. Display a white screen, so that the problem area can be seen clearly.
2. Maximize contrast and brightness, then place a bright white rectangle on the area.
3. After a while, the lines should disappear.
LCT1116-001A(EN)
02.1.29, 2:54 PM
25
Содержание DT-V1900CG
Страница 30: ......
