JVC DT-V17G2, Инструкция по эксплуатации

Страница: 18 / 36

18 18
SDI Format
Setting value: Auto, MS1YCbCr, MS2YCbCr, MS3YCbCr, MS4YCbCr, MS2 RGB, MS3 RGB, 3G-B-DS
When “Auto” is selected, 3G SDI/HD-SDI DUAL LINK signals are automatically recognized. (Normally select “Auto.”)
l
If the picture is unstable with “Auto”, select the setting value according to the input signal format.
l
“M” (meaning “Manual”) is displayed on the status display when a setting other than “Auto” is selected.
IMD
Settings for IMD (In-monitor Display). (
+
Page 19)
Item To do Setting value
IMD Display Display setting
Off : Not displayed
On : Displayed
Off, On
IMD Protocol Serial communication protocol setting
Off : Supports JVC protocol
TSL V4.0 : Supports TSL UMD Protocol V4.0
Off, TSL V4.0
Address Address setting
000 to 126
: Set a particular address
000 to 126
IMD Size Text size setting
Small : Small size
Middle : Middle size
Large : Large size
Small, Middle, Large
IMD Position Specify the display position. Upper, Lower
Text Color Text color setting
Command : Same color as that set for communication (Command)
Red, Green, Amber, Blue, Cyan, Magenta, White : Color settings
Command, Red, Green, Amber,
Blue, Cyan, Magenta, White
Tally 1 Color Tally 1 color setting
Command : Same color as that set for communication (Command)
Red, Green, Amber, Blue, Cyan, Magenta, White : Color settings
Command, Red, Green, Amber,
Blue, Cyan, Magenta, White
Tally 2 Color Tally 2 color setting
Command : Same color as that set for communication (Command)
Red, Green, Amber, Blue, Cyan, Magenta, White : Color settings
Command, Red, Green, Amber,
Blue, Cyan, Magenta, White
Background Color Display background color setting
Black : Set the background of the IMD display to black.
Translucent : The picture on the monitor shows through the IMD display.
Transparent : Set the background of the IMD display transparent.
Black, Translucent, Transparent
reset Return the “IMD” settings to their default values.
all reset
Restores all the settings and adjustments of the monitor to the default.
l
“Hour Meter” and settings specified using the Picture adjustment knob (
+
3 on page 6) are not reset.
Menu Configuration (cont.)
'79*B(1LQGE