JVC DT-V1710CG Скачать руководство пользователя страница 46

Страница: 46 / 228

1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws

(provided).

2. Attach the Power Cord Holder cover to the AC power cord.

3. Connect the AC power cord to the AC inlet, and join the Power Cord Holder cover with the

case.

ATTACHING THE POWER CORD HOLDER

•

The provided Power Cord Holder prevents accidental disconnection of the AC power cord from the AC inlet.

•

The Power Cord Holder consists of two parts; a case and cover.

Press the cover until it clicks.

Hold until it clicks.

Caution:

•

A different plug shape will result in the cover being

attached to a different position.

•

Check to make sure the plug doesn't pull out after the

cover is attached.

Note:

To disconnect the power cord, click the tab to open the
cover.

Caution:

Use only the provided screws.

PREPARATION

(cont'd)

LCT1423-001A_p2-17

4/29/03, 5:04 PM

Содержание DT-V1710CG





































































































































































































































Результаты поиска

Содержание DT-V1710CG

Отзывы:

Похожие инструкции для DT-V1710CG

Бренды по названию

Популярные бренды

JVC DT-V1710CG, Инструкция по эксплуатации

Результаты поиска

Содержание DT-V1710CG

Отзывы:

Похожие инструкции для DT-V1710CG

Бренды по названию

Популярные бренды