20
Exit Main Menu
Return to previous menu
Exit Main Menu
Set front key board light brightness
Select a time to quit menu if there’s no operation
Assign functions to the function
keys F1 - F6 on the front key board
Select a time to enter Green mode if there’s no operation
Select a key lock mode
Reset all the monitor settings
Black Backlight, Gray Backlight
30Sec, 1Hour, 2Hour, 4Hour, OFF
OFF, Lock All,
Lock Rotary Knobs, Lock Key Buttons
NO, YES
NO, OFF
NO, YES
Return to previous menu
Switch on multiview
Time code, Color Temp,Flip mode,
Freeze Frame, WFM Type, WFM Single Line,
UMD, Marker, H/V Delay, Blue Only, Audio bar,
Zebra, Vector, Low Latency Mode, Histogram,
Odd/Even Frame, Lissajous, Focus Assist,
False color, Multiview
To do
User 1-8, OFF
User 1-8
OFF,ON
User 1-8
OFF, LOW, HIGH
5-180
Global
SFP
SDI1
SDI2
SDI3
SDI4
4xSDI(SQ)
4xSDI(2-SI)
HDMI
Back
Exit
Setting value
Item
Key Brightness
OSD TIME (Sec)
Multiview *1
Load Profile
*2
F1
F2
F3
F4
F5
F6
Green Mode
Idle Duration
Key Lock *3
Firmware Update *5
*4
System Reset
Back
Exit
System Setting
*2 Load Profile
Select “Global” to “User 1-8”, to assign the user profile to all the input sources;
Select “Global” to “OFF”, the user profiles can be assigned to each input source individually.
*1 Multiview
Switch on Multiview, the monitor can display 4 different formats SDI signal, supported displaying
1080P/1080I/1080PsF/4K, fourth channel signal can also display HDMI signal, support HD and above standard,
as shown in the folllowing figure:
4K
(SDI 1 IN)
1080P
(SDI2 IN)
1080PsF
(SDI3 IN)
1080I
(SDI4 IN or
HDMI IN)
When Multiview is selected:
1
、
Video Lumina Range
、
YUV Color Matrix
、
Color Processing
、
Gamma and
UMD of each channel can be set respectively.
2
、
Some menu functions are turned off or displayed in gray.
User profile saving, firmware update.
Select a user profile for all input sources
Select a user profile for SFP input only
Select a user profile for SDI 1 input only
Select a user profile for SDI 2 input only
Select a user profile for SDI 3 input only
Select a user profile for SDI 4 input only
Select a user profile for HDMI input only
Select a user profile for Quad split 4x3G input only
Select a user profile for 2SI interleave 4x3GSDI input only
Save all the current menu settings to User profile,
support rename user profile when saving.
Turn down or switch off the LCD backlight to save energy
Enter firmware update
Closed Caption
Switch on closed caption
Save Profile
Multiview
Select a user profile for Multiview input only
