Masterpage:Right+
EN
39
Filename [DR-MV1SEK_05DVD Operation1.fm]
Page 39
April 15, 2004 11:41 am
OPERATIONS ON DVD DECK
Setting The Progressive Mode
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
w e
to select “
”, then press
ENTER
. The pop-up
window appears under the selected item.
3
Press
rt
to select the desired option, then press
ENTER
.
AUTO 1
: Used to play a disc containing both video and film source
materials. This system recognises the source type (video or film)
of the current disc according to the disc information. Normally
select this option.
AUTO 2
: Almost the same as the “AUTO 1”, but the processing of
the scenes with movement is different. Select “AUTO 1” or
“AUTO 2” to your preference.
FILM
: Suitable for playing back a progressive scanned film source
disc.
VIDEO
: Suitable for playing back a video source disc. The outlines
on the played back pictures will be soft.
To clear the on-screen bar
Press
ON SCREEN
.
NOTE:
When the progressive mode is set, be sure to set “L-1 OUTPUT” to
“COMPONENT”. (
墌
pg. 74) Progressive scan is output only from
COMPONENT VIDEO OUT connector.
Programme Playback
You can play back up to 30 tracks in the desired order.
While stopped
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
w e
to select “PRGM”, then press
ENTER
. The
programme table appears under on-screen bar.
3
Press the
number keys
to
enter the track numbers in the
desired order.
Examples:
A
To select track 5, press the
number key “5”
and
ENTER
.
B
To select track 15, press the
number key “1”
and
“5”
.
C
To select track 25, press the
number key “2”
and
“5”
.
If you have specified a wrong selection
Press
CANCEL
(
&
). The last selection is erased.
Or press
CLEAR
(
8
). The whole selection is erased.
4
Press
4
. Playback starts in the programmed order.
●
When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
●
To add tracks to the end of the programme, perform steps
1
through
3
.
●
During Programme Playback, pressing
6
skips to the next
selection of the programme. Pressing
2
returns to the beginning of
the current selection.
To clear the on-screen bar and the contents of the programme
Press
ON SCREEN
.
To cancel Programme Playback
Press
w e
to select “PRGM”, then press
ENTER
.
NOTE:
Programme Playback is not possible depending on the type of disc.
DR-MV1SEK_00.book Page 39 Thursday, April 15, 2004 3:30 PM
