Filename [DR-MV1SEK_05DVD Operation1.fm]
Masterpage:Left+
38
EN
Page 38
April 15, 2004 11:41 am
OPERATIONS ON DVD DECK
a
Simulated Surround Effect
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your
2-channel stereo system.
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
w e
to select “
”, then press
ENTER
.
●
Above the selected item, “3D-ON” appears and Simulated Surround
Effect is activated.
●
Each time you press
ENTER
, “3D-ON” appears and disappears
alternately.
To clear the on-screen bar
Press
ON SCREEN
.
To cancel the simulated surround effect
Press
ENTER
to clear “3D-ON” from the screen.
NOTES:
●
The simulated surround effect works correctly only when playing back
a title recorded in multichannels.
●
Simulated Surround Effect does not affect the DVD VIDEO bitstream
signal from the DIGITAL AUDIO OUTPUT connector.
●
When Simulated Surround Effect is activated, the settings of
“ANALOG AUDIO OUT” and “D. RANGE CONTROL” are disabled.
(
墌
pg. 80)
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press
ON SCREEN
twice to access the on-screen bar.
2
Press
w e
to select “
”, then press
ENTER
. The pop-up
window appears under the selected item.
3
Press
rt
to select the desired option, then press
ENTER
.
NORMAL
: Normally select this option.
CINEMA
: Suitable for a movie disc, etc.
SHARP
: Clearer, sharper-edged picture when viewing images with
lots of flat, same-coloured surfaces such as cartoons.
SOFT
: Select this option when too much noise appears.
To clear the on-screen bar
Press
ON SCREEN
.
1
4
7
2
5
8
0
3
6
9
ON SCREEN
0 – 9
ENTER
2
4
6
rtw e
CANCEL (
&
)
CLEAR (
8
)
SAT
DR-MV1SEK_00.book Page 38 Thursday, April 15, 2004 3:30 PM
