Masterpage:Right+
EN
69
Filename [DR-MH30UJ_10Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 69
Monday, 12 July 2004 14:10
DISPLAY SET
8
SUPERIMPOSE
— OFF /
AUTO
When this function is set to “AUTO”, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (
墌
pg. 21)
OFF
: To turn off superimposed indications.
AUTO
: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
●
Even when “SUPERIMPOSE” is set to “OFF”, you can display the
various operational indicators by pressing
ON SCREEN
. To clear the
operational indicators, press
ON SCREEN
again.
●
When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (
墌
pg. 62)
●
When you select “AUTO”, during playback, the operation mode
indicators may be disturbed depending on the type of disc being used.
8
BLUE BACK
— OFF /
ON
When this function is set to “ON”, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to “OFF”.
8
DIMMER
—
BRIGHT
/ DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
BRIGHT
: Normally select this.
DIMMED1
/
DIMMED2
: To change the brightness level. (Blue lamp
on the front display panel becomes dimmer.)
OFF
: To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8
POWER SAVE
—
OFF
/ ON
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
NOTES:
●
During Power Save mode —
— the front display panel will be turned off.
●
Power Save does not work when —
— the unit is in the Timer mode.
— the unit’s power is turned off after timer-recording or Instant Timer
Recording.
— the Automatic Satellite Program Recording mode is engaged.
(
墌
pg. 50)
●
It takes some time for the unit to complete initialisation after you turn
on the unit power, with “WAKE UP” blinking on the front display panel.
8
ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 3
different languages.
For details, refer to “On-screen Language Set” (
墌
pg. 21).
If you connect the unit and TV with Component Video Connection
(
墌
pg. 19), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV system,
and Progressive scan mode which enables reproduction of higher-
quality images.
8
Interlaced scan
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
8
Progressive scan
Progressive scan displays all the horizontal lines of a picture at one
time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical resolution.
1
Press
PROGRESSIVE SCAN
for 3 or more seconds.
●
Video output indicator (
) lights on the front display panel if
Progressive scan mode has been established. (
墌
pg. 14)
●
Each press of
PROGRESSIVE SCAN
for 3 or more seconds
switches the scan mode.
NOTES:
●
Interlaced scan mode is the setting at your purchase.
●
Interlaced scan mode might be suitable depending on video material.
●
Scan mode cannot be set while menu screen is displayed.
●
When the Progressive scan mode is engaged, no video signal is
output from S-VIDEO OUTPUT connectors and VIDEO/AUDIO
OUTPUT connectors.
Scan Mode Set
ATTENTION:
Your TV needs to be compatible with Progressive.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
PROGRESSIVE SCAN
CABLE/DBS
DVD
TV
DR-MH30UJ_00.book Page 69 Monday, July 12, 2004 3:17 PM
