JVC DLA-VS2400G, Инструкция по эксплуатации

Страница: 23 / 64

3 Turn off the power
Projector unit: press the
A
[STANDBY/ON] button
Remote control (sold separately): press the
B
[STAND BY] button
0
While the “Are you sure you want to turn off?” message is displayed, press the button again.
0
The lamp turns off, and the “STANDBY/ON” indicator switches from a green light to a red blinking light.
0
After the light goes off, the fan will run for about 120 seconds to cool down the lamp (Cool-down mode).
Do not disconnect the power cable while cooling is in progress.
0
After about 120 seconds, the “STANDBY/ON” indicator switches from a blinking red to a solid red light.
.
LAMP WARNING STANDBY/ON LAMP WARNING STANDBY/ON ND TANDBY
In standby state
“STANDBY/ON” lights up (red)
In the Cool-down mode
“STANDBY/ON” blinking (red)
CAUTION
0
The power cannot be turned off within approximately 60 seconds after it has been turned on.
0
After the light goes off, the fan will run for about 120 seconds to cool down the lamp (Cool-down mode).
Do not disconnect the power cable while cooling is in progress.
0
The power cannot be turned on again while cooling is in progress (120 seconds).
0
Pull out the power plug when the unit is not to be used for a prolonged period of time.
23
Operate