15
ENGLISH
Installing the Projector
Precautions for Installation
■
When installing the projector, observe the followings:
• Do not use the projector placed on its side.
Avoid using the projector placed on its side. This could cause a malfunction.
• Use the projector within the installed angle.
Avoid using the projector inclined ±30° or more right-to-left or left-to-right. This could cause color variation or harm the lamp
life.
• Do not block the exhaust vents.
Do not use a cover which encloses the projector air-tight or blocks the exhaust vents. Allow sufficient space around the
projector. When the projector is enclosed in a space of the following dimensions, use an air conditioner so the temperature
inside becomes equal to the outside temperature.
Allowable minimum space required
CAUTION
Do not install the projector in the following places :
• There is much water, humidity or dust.
• The projector may be subjected to oil smoke or cigarette smoke.
• On a soft surface such as a carpet or cushion.
• The projector may be subjected to direct sunlight.
• Temperature is high or humidity is low.
Allowable operation temperature range: + 5°C to + 35°C (41°F to 95°F)
Allowable relative humidity range:
20% to 80% (no condensation)
Allowable storage temperature range:
–10°C to +60°C (14°F to 140°F)
30cm (11 - 13/16”)
20cm (7 - 7/8”)
60cm (23 - 5/8”)
30cm (11 - 13/16”)
20cm (7 - 7/8”)
M20U p.15-23
00.6.15, 8:17 PM
15
