EN-14
Record A Scene
Insert a cassette and try recording.
ABOUT THE POWER GRIP
(Cont.)
** The camcorder’s battery and the Power Grip battery packs cannot be used at the same time. If both are installed, the
Power Grip battery packs become the power source. When the Power Grip Battery Packs near complete discharge
(when the Power Lamp begins blinking), set the camcorder to RECORD/STANDBY mode, set the Power Dial to
“OFF” and detach the Power Grip DC Cord from the camcorder. Then turn the camcorder’s power back on.
OFF
5S
REC
PLAY
PAUSE
2
1
3
Blinks*
Extinguishes (Batteries
have discharged)
*Depending on the temperature,
the time from when the Power
Lamp begins blinking to when it
goes out will vary (it takes
longer in colder temperatures).
Power Lamp Lights
Viewfinder
Record/Standby
Mode
RECORDING
START/STOP Button
Power Lamp Lights
