7
ENGLISH
BASIC OPERATIONS
Note:
When you use this unit for the first
time, set the built-in clock correctly, see
page 29.
1
Turn on the power.
“HELLO!” appears on the
display.
Note on One-Touch Operation:
When you select a source in step
2
below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
• Each time you press CD/CH,
the source alternates between
CD* and CD-changer (or
external component)**.
• Each time you press FM/AM, the
band changes to FM (FM1,
FM2, FM3) and AM.
• Each time you press TAPE/AUX,
the source alternates between
TAPE*** and external
component (AUX INPUT).
*
If a disc is not in the loading slot, you cannot
select CD as the source to play. (“NO DISC” will
appear on the display.)
**
Without connecting the CD changer or the
external component, you cannot select it as the
source to play.
***
If a cassette is not in the cassette compartment,
you cannot select TAPE as the source to play.
(“NO TAPE” will appear on the display.)
To operate the tuner, see pages 8 – 11.
To play the CD, see pages 12 – 15.
To play an MP3 disc, see pages 18 – 21.
To operate the tape deck, see pages 22 – 24.
To operate the external components, see page 34.
To operate the CD changer, see pages 35 – 37.
3
Adjust the volume.
4
Adjust the sound as you want
(see pages 25 – 27).
• If you need to change the level meter
pattern, see page 28.
To drop the volume immediately
Press
ATT
/
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop immediately.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press
ATT
/
for more than 1 second.
“SEE YOU” appears, then the unit turns off.
•
If you turn off the power while listening to a
disc,
the disc play will start from where
playback has been stopped previously, next
time you turn on the power.
•
If you turn off the ignition key without
turning off this unit,
the unit will automatically
turn on when you turn on the ignition key next
time. If the last selected source is ready for
playback (ex. a disc or a tape is in the unit),
playback starts automatically.
2
1
3
To increase the volume
To decrease the volume
Volume level
Clock time
EN02-07KW-XC939[EE]f.pm6
6/23/03, 3:47 PM
7