1-9
NX-HD10
Prior to performing the following procedure, remove
the top cover, the HDD board assembly and the rear
cover.
Remove the screw
H
attaching the card wire sub
board on the left side of the body (The card wire sub
board can be removed if only the top cover has been
removed).
Disconnect the card wire from connector CN602 and
CN605 on the system control board.
Remove the three screws
I
.
Disconnect the connector CN603 and CN604
outward and remove the system control board.
Disconnect the wire from connector CN501 on the
inside of the system control board.
1.
2.
3.
4.
5.
Remove the System control board/Card
wire sub board (See Fig.13,14)
Prior to performing the following procedure, remove
the top cover, the HDD board assembly and the rear
cover.
Remove the screw
J
on the right side of the body
(The card wire sub board can be removed if only the
top cover has been removed).
Disconnect the card wire from connector CN661 and
CN695 on the main amplifier board.
1.
2.
Removing the Card wire sub board/
Headphone board/ Heat sink
(See Fig.15~18)
CN602 CN605
Front panel
Card wire sub board
CN603
CN501
CN604
CN661
CN695
I
I
I
J
H
Main
amplifier board
Card wire sub board
Fig.13
Fig.14
Fig.15
System control board
System control board
Содержание CA-NXHD10
Страница 62: ...3 2 NX HD10 M E M O ...