background image

59

Refer

ence

Avoid moisture, water and dust

Do not place the system in moist or dusty places.

Avoid high temperatures

Do not expose the system to direct sunlight and do 
not place it near heating equipment.

When you are away

When away on travel or for other reasons for an 
extended period of time, disconnect the power 
cable plug from the wall outlet.

Do not block the vents

Blocking the vents may damage the system.

Care of the cabinet

When cleaning the system, use a soft cloth and 
follow the relevant instructions on the use of 
chemically-coated cloths. Do not use benzene, 
thinner or other organic solvents including 
disinfectants. These may cause deformation or 
discoloring.

If water gets inside the system

Turn the system off and disconnect the power 
cable plug from the wall outlet, then call the store 
where you made your purchase. Using the system 
in this condition may cause fire or electrical shock.

• This product incorporates copyright protection 

technology that is protected by U.S. patents and 
other intellectual property rights. Use of this 
copyright protection technology must be 
authorized by Macrovision, and is intended for 
home and other limited viewing uses only unless 
otherwise authorized by Macrovision. Reverse 
engineering or disassembly is prohibited.

• CONSUMERS SHOULD NOTE THAT NOT ALL 

HIGH DEFINITION TELEVISION SETS ARE 
FULLY COMPATIBLE WITH THIS PRODUCT 
AND MAY CAUSE ARTIFACTS TO BE 
DISPLAYED IN THE PICTURE. IN CASE OF 
525 OR 625 PROGRESSIVE SCAN PICTURE 
PROBLEMS, IT IS RECOMMENDED THAT 
THE USER SWITCH THE CONNECTION TO 
THE “STANDARD DEFINITION” OUTPUT.
IF THERE ARE QUESTIONS REGARDING 
OUR TV SET COMPATIBILITY WITH THIS 
MODEL 525p AND 625p DVD PLAYER, 
PLEASE CONTACT OUR CUSTOMER 
SERVICE CENTER.

• USE OF THIS PRODUCT IN ANY MANNER 

THAT COMPLIES WITH THE MPEG-4 VISUAL 
STANDARD IS PROHIBITED, EXCEPT FOR 
USE BY A CONSUMER ENGAGING IN 
PERSONAL AND NON-COMMERCIAL 
ACTIVITIES.

• DivX® is a registered trademark of DivX, Inc., 

and is used under license. 

• ABOUT DIVX VIDEO: DivX® is a digital video 

format created by DivX, Inc. This is an official 
DivX Certified or DivX Ultra Certified device that 
plays DivX video.

• ABOUT DIVX VIDEO-ON-DEMAND: This DivX® 

Certified device must be registered in order to 
play DivX Video-on-Demand (VOD) content. 
First generate the DivX VOD registration code 
for your device and submit it during the 
registration process. [Important: DivX VOD 
content is protected by a DivX DRM (Digital 
Rights Management) system that restricts 
playback to registered DivX Certified devices. If 
you try to play DivX VOD content not authorized 
for your device, the message “Authorization 
Error” will be displayed and your content will not 
play.] Learn more at www.divx.com/vod.

• Plays DivX® video
• Microsoft and Windows Media are either 

registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or 
other countries.

• DVD Logo is a trademark of DVD Format/Logo 

Licensing Corporation.

• Manufactured under license from Dolby 

Laboratories. “Dolby” and the double-D symbol 
are trademarks of Dolby Laboratories.

• Manufactured under license under U.S. Patent 

numbers: 5,451,942; 5,956,674; 5,974,380; 
5,978,762; 6,487,535 and other U.S. and 
worldwide patents issued and pending. DTS and 
DTS Digital Surround are registered trademarks 
and the DTS logos and Symbol are trademarks 
of DTS, Inc. © 1996-2007 DTS, Inc. All Rights 
Reserved.

• HDMI, the HDMI logo and High-Definition 

Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing LLC.

• HDCP is the abbreviation of “High-bandwidth 

Digital Content Protection,” and is the high-
reliable copy control technology licensed by 
Digital Content Protection, LLC.

License and trademark

Safety Precautions

Notes on operations (continued)

NX-F30[U].book  Page 59  Tuesday, April 21, 2009  6:23 PM

Содержание CA-NXF30









































































Отзывы: