JVC CA-MXKC58, Инструкция по эксплуатации

Страница: 67 / 134

26
Eng
lish
Additional Information
Learning More about This System
Daily Operations—Playback
(see pages 9 to 15)
Listening to the Radio:
• If you store a new station into an occupied preset number, the
previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If this
happens, preset the stations again.
Playing Back a Disc:
• When using an 8 cm disc, place it on the inner circle of the disc
tray.
• This System cannot play “packet write” discs.
• For MP3/WMA playback...
– MP3/WMA discs are required a longer readout time than
regular CDs. (It depends on the complexity of the group/file
configuration.)
– Some MP3/WMA files cannot be played back and will be
skipped. This result from their recording processes and
conditions.
– When making MP3/WMA discs, use ISO 9660 Level 1 for
the disc format.
– This System can play back MP3/WMA files with the
extension code <.mp3> or <.wma> (regardless of the letter
case—upper/lower).
– Some characters or symbols will not be shown correctly on
the display. The maximum character number shown on the
display is 32 (without the extension code) for files, and 30
for ID3 tag.
– It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at a bit rate of 128 kbps.
Similarly each WMA file at a sampling rate of 44.1 kHz and
at a bit rate of 96 kbps.
– This System can recognize the total of 255 files and folders.
Those exceeding the maximum number cannot be
recognized.
– Playback order of MP3/WMA tracks may be different from
the one you have intended while recording. If a folder does
not include MP3/WMA tracks, they are ignored.
When discs* in more than one tray are loaded on the disc
trays, they are played in sequence as follows:
Ex.: When CD 2 is selected:
CD 2 -> CD 3 -> CD 1 (then selects CD 2, and stops)
* When no disc is loaded on the tray, that disc number is
skipped.
You can exchange discs while playing or selecting another
disc.
Daily Operations—Sound & Other Adjustments
(see pages 16
)
Adjusting the Volume:
• Be sure to turn down the volume before connecting or putting
the headphones.
Adjusting the Sound:
• This function also affects the sound through the headphones.
Setting the Clock:
• “AM12:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Advanced Disc Operations
(see pages 21 to 23)
Programming the Playing Order—Program Play:
• If you try to program a 33rd track, “FULL” appears on the
display.
• While programming steps...
Your entry will be ignored if you have tried to program an item
number that does not exist on the disc (for example, selecting
track 14 on a disc that only has 12 tracks).
Timer Operations
(see pages 24 and 25)
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the clock
first, then the timer again.
• If you set the Sleep Timer after Daily Timer starts playing the
selected source, Daily Timer is canceled.