JVC CA-MXKC58, Инструкция по эксплуатации

Страница: 19 / 134

14
To Connect iPod
Connect the iPod to the System using the supplied cable.
Make sure the System is turned off when you connect it.
1
Connect the arrow of iPod terminal and the arrow of
the connector facing each other.
2
With the iPod and the circle on the connector facing
up, squeeze the buttons on the sides, and insert it into
the iPod.
When disconnecting the iPod, make sure that the System is
turned off.
To playback sounds on the iPod
To select a track
To Locate a Particular Portion
While playing iPod, press and hold until the portion you
want is reached.
To set iPod sleep
Press and hold the button for a few seconds until iPod goes
to sleep.
memo
• Always set volume to “VOL MIN” when connecting or
disconnecting iPod.
You can place the
iPod on the supplied
stand for iPod.
To remove the
connector from your
iPod, squeeze the
buttons on the sides and
pull.
To start: To pause:
Decrease the track
numbers
Increase the track
numbers
Fast-forwards the track.
Fast-reverses the track.