B U T T O N F U N C T I O N S
2
3
TV/Video selects the input mode.
TV/V
IDEO
The 100+ button accesses all channels
above Channel 99.
To move to Channel 124:
100+
2 (two)
4 (four)
There are two kinds of Return…
— Set a “Return Channel” to
re t u rn to after scanning with C
H A N N E L
- / + .
R
ETURN
+ and hold for 3 seconds
Scan with C
HANNEL
-/+
R
ETURN
+
Note:
To cancel a Return channel, pre s s
and hold for another 3 seconds
until “Return Channel Cancelled!” appears.
— Return to the last channel
viewed after moving to another channel
via the 10 key pad.
R
ETURN
+
Move to another channel with
the 10 key pad.
R
ETURN
+
This remote will control your VCR. It is
preset to control a JVC VCR. For any
other brand, you must set the
manufacturer’s code (page 13).
Change channels with the 10 key pad.
For example, to move to Channel 7:
0 (zero)
7 (seven)
The M
ENU
buttons allow you to control
the options located in the menu
screens. See page 14 for a complete
discussion on these buttons.
NOTES :
You can find
another discus-
sion of Return
and on
page 11.
The M
UTING
button turns the sound off
completely when you press it. Press it
again to restore the volume to the
previous level.
TV VIDEO
Creates a deep, 3-dimensional sound
effect by channeling the sound
through the TV’s front firing speakers.
RETURN CHANNEL
PROGRAMMED !
