NOTE:
MTS has no effect
on normal sound
broadcasts.
MTS technology gives you a choice
among stereo, mono, and Second
Audio Programs (SAP).
To MTS
Select the mode
(The ON AIR arrow tells you if
the current signal contains
Stereo or SAP)
Note:
Keep the TV in STEREO mode
to get the fullest sound
quality.
Note:
SAP will allow you to hear an
alternative soundtrack, if
available.
Note:
Choose MONO to reduce
excess noise in a program or
channel.
M TS STEREO SAP MO NO
ON AIR
The Bass level adjustment feature
allows you to raise or lower the level of
lower frequencies in the TV’s sound.
To BASS
To emphasize bass
To reduce bass
To move to next
The Treble level adjustment feature
allows you to raise or lower the level of
higher frequencies in the TV’s sound.
To TREBLE
To increase treble
To decrease treble
To move to next
The Balance adjustment feature
allows you to center the TV’s sound
to your needs.
To BALANCE
To shift the speaker balance
to the right
To shift the speaker balance
to the left
To move to next
Some Sound Advice
You can tell if a program is broadcast in stereo by the position of the ON AIR
arrow in the MTS menu. Unfortunately, it is common for some cable
companies to squash the transmission of stereo programs to mono because
they only have mono equipment. If your TV is connected to a cable system,
the sound is at the mercy of that cable company — if they broadcast in mono,
you receive mono sound regardless of the original stereo programming.
Fortunately, most programs that are broadcast in stereo are aired on the
major television networks. If you connect your TV to an antenna instead of
cable, and set the Tuner Mode (page 15) to “Air” instead of “Cable,” you will
be able to pick up stereo broadcasts in stereo.
1
8
S O U N D A D J U S T
