JVC AV-28F3SJ, Инструкция по эксплуатации

Страница: 9 / 18

- 8 -
Setting Hue (In AV mode only)
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
• Using “ ” or “ ” button select Hue.
• Press “ ” button to increase the green tones.
• Press “ ” button to increase the red tones.
Center value is indicated with two reciprocal arrows.
67$1'$5'
&22/
3,&785(
5(6(7
%5,*+71(66
&2175$67
&2/285
6+$531(66
7,/7
+8(
3,&785(02'(
&2/2857(03
Setting Picture Mode
This item is used to change the picture mode. By pressing
“ ” or “ ” button you may select one of these options:
STAN-
DARD, SOFT and BRIGHT .
You can also set the Picture Mode by pressing the Blue but-
ton directly.
Setting Colour Temp
This item is used for white colour tint adjustment. By pressing
“ ” or “ ” button you may select one of these options:
COOL ,
NORMAL, WARM .
Setting VNR (Video Noise Reduction)
This item is used to reduce the image noise and improve the
picture quality at weak signals.
• Using “ ” or “ ” button select VNR.
• Press “ ” or “ ” button to set VNR level to
OFF , MIN ,
AUTO or MAX.
AUTO adjusts the VNR level to OFF , MIN or MAX automati-
cally according to the intensity of the noise.
67$1'$5'
&22/
2))
2))
3,&785(
5(6(7
&2175$67
&2/285
6+$531(66
7,/7
3,&785(02'(
&2/2857(03
915
9&502'(
Setting VCR Mode (In AV mode only)
• Using “ ” or “ ” button select VCR Mode.
• When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the “ VCR MODE ”
setting from “ ON ” to “ OFF ”.
Reset
Press BLUE button to reset the picture modes to factory de-
fault settings.
To Store the Settings
In the Picture Menu, all settings are stored automatically.
Sound Menu
• Press “ MENU ” button, now you are in MENU. In the MENU ,
select SOUND using “ ” or “ ” button, then enter the sound
menu by pressing “ ” or “ ” button.
0(18
3,&785(
6281'
)($785(
,167$//$7,21
352*5$00(
6281'
92/80(
%$/$1&(
6281'02'(
%$66
75(%/(
0212
Setting Volume
As you enter the sound menu, Volume will be the first se-
lected option.
• Press “ ” button to increase volume.
• Press “ ” button to decrease volume.
Or you can directly change the volume settings using “
+ ”
(to increase) or “ - ” (to decrease) button.
Setting Balance
It allows adjusting the distribution between the left and right
speakers.
• Using “ ” or “ ” button select Balance.
• Press “ ” button to change balance to the right.
• Press “ ” button to change balance to the left.
When balance control is in mid position, the cursor is dis-
played with two reciprocal arrows.
Selecting Sound Mode
• Using “ ” or “ ” button select Sound Mode.
• Press “ ” or “ ” button to change Mode.
You can select
MONO , STEREO, DUAL-I or DUAL-II mode,
only if the selected channel supports that mode.
In case of bilingual broadcast (Dual Sound), you can select
original or dubbed language using mode option.
Setting Bass Level
• Using “ “ or “ ” button select Bass Level.
• Press “ ” button to increase bass level.
• Press “ “ button to decrease bass level.
Setting Treble Level
• Using “ “ or “ ” button select Treble
• Press “ ” button to increase treble level.
• Press “ “ button to decrease treble level
ENG&BG-AK49-C1512UK-2826W-RF-CLED-PLLCH-(AV-28F3SJ)-BSI-10041579-50086694.p65 13.04.2006, 14:32 8