No. 52005
AV-27F703
AV-27F713
AV-27F803
15
BASIC OPERATION OF SERVICE MENU
1. TOOL OF SERVICE MENU OPERATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2. In general, basic setting (adjustments) items or verifications are performed in the SERVICE MENU.
(1) V/C (S)
･･･････ ･････････････ ････････････ ････
This set the s etting values (adjustment values) of the VIDEO/CHROMA circuits.
(2) DEF (D)
･･･････ ･････････････ ････････････ ･･･
This set the s etting values (adjustment values) of the DEFLECTION circuit.
(3) SOUND (A)
･･･････ ･････････････ ････････････
This set the s etting values (adjustment values) of the AUDIO circuit.
(4) OTHERS (F)
･･･････ ･････････････ ･･･････････
This is us ed when the OTHERS MODE is verified.
[Do not adjust]
(5) PIP (PIP)
･･･････ ･････････････ ････････････ ･･
This set the s etting values(adjustment values) of the PICT URE-IN-PICTURE circuit.
(PIP is means as Picture In Picture)
[AV-27F803
/S
]
(6) 3LY/C(LYC) / 3DY/C(DYC)
･･･････ ････････････
This is us ed when the 3L(or 3D) Y/C MODE is verified.
[Do not adjust]
[3L Y/C(LYC) =AV-27F703
/S
, AV-27F713/S / 3D Y/C( DYC)=AV-27F803
/S
]
(7) LOW LIGHT
･･･････ ･････････････ ････････････
This sets the s etting values (adjustment values ) of the W HITE BALANCE circuit.
(8) HIGH LIGHT
･･･････ ･････････････ ･･･････････
This sets the s etting values (adjustment values ) of the WHITE BALANCE circuit
(9) RF AFC
･･･････ ･････････････ ････････････ ････
This is us ed when the RF AFC MODE is verified.
[Do not adjust]
(10) VCO
･･･････ ･････････････ ･･････････････････
This is us ed when the IF VCO is adjus ted.
(11) I
2
C BUS
･･･････ ･････････････ ････････････ ･･･
This is us ed when ON/OFF of the I
2
C BUS CTRL is set.
[Fixed ON]
(12) SYSTEM (SYS)
･･･････ ･････････････ ･････････
This is us ed when the SYSTEM is verified.
[Fixed value]
3. Basic Op erations of the SERVICE MENU
(1) Ho w to enter the SERVICE MENU.
Press the
SLEEP TIMER
key and s et the
SLEEP TIMER
for
｢
0
MIN
｣
.
Then press the
DISPLAY
key and
VIDEO STATUS
key of the
remote control unit at the same time to enter the SERVICE
MENU sc reen.(FiG.1)
(2) SERVICE MENU screen selection
In SERVICE MENU, press the FUNCTION (
▼
/
▲
) key to
select any of the SUB MENU items.
(The letters of the s elected items are displayed in yellow.)
(3) Enter the any setting ( adjustment ) mode
%
1. V/C(S), 2. DEF(D), 3. SOUND(A), 4. OTHERS(F),
5. PIP(PIP), 6. 3L Y/C(LYC)
[AV-27F703/
S
/ AV-27F713
/S
]
/
3D Y/C(DYC)
[AV-27F803
/S
]
, 7. LOW LIGHT, 8. HIGH LIGHT,
9. RF AFC, 10. VCO, 11. I
2
C BUS
and
12. SYSTEM(SYS)
mode.
1) If select any of
1. V/C(S) / 2. DEF(D) / 3. SOUND(A)
/ 4. OTHERS(F) / 5. PIP(PIP) / 6. 3L Y/C(LYC)
[AV-27F703/
S
/ AV-27F713
/S
]
, 3D Y/C(DYC)
[AV-27F803
/S
]
/
7. LOW LIGHT / 8. HIGH LIGHT / 9. RF AF C /
10. VCO / 11. I
2
C BUS / 12. SYSTEM(SYS)
items, and
the FUNCTION ( /
)
key is pressed from SERVICE
MENU (MAIN MENU), the each screens will be
displayed as shown in figure page later.
2) Then the settings or verifications can be performed
SERVICE MENU
1.V/C(S) 2.DEF(D)
3.SOUND(A) 4.OTHERS(F)
5.PIP(PIP) 6.3L Y/C(LYC)
7.LOW LIGHT 8.HIGH LIGHT
9.RF AFC 10.VCO
11.1
2
C BUS 12.SYSTEM(SYS)
SELECT BY
OPERATE BY EXIT BY EXIT
SERVICE MENU
AV -27F803
6. 3D Y /C(DY C)
Fig.1
NOTE Although des ign is different, eac h remote c ontroller
has the s ame control function.
KEY ASSIGNMENT OF REMOTE CONTROL UNIT
DISPLAY
(RM-C325G)
FUNCTION
▼
/
▲
POWER
NUMBER
SLEEP
TIMER
VIDEO
STATUS
EXIT
PIP OFF
FUNCTION
/
MUTING
MEMORY
