Connection
.
1-
4'6740
%100'%6+10
*&/+%100'%6+10
1((
%1/210'06176276
':+6
5'.'%6
K
8+&'1+02765'66+0)
8+&'1
5'672
/10+6146;2'
*&/+%'%
m
MONITOR TYPE
For setting the aspect ratio according to the connected
monitor.
Setting Values
Description
16:9
Set to this value when connected to
monitors with 16:9 aspect ratio.
16:9FULL
Choose this setting when a 16:9 monitor
is connected to display images without
the black borders.
4:3 PAN&SCAN Set to this value when connecting to
monitors with an aspect ratio of 4:3.
Plays back videos with the left and right
edges trimmed off.
4:3
LETTERBOX
Set to this value when connecting to
monitors with an aspect ratio of 4:3.
Plays back videos with a black band at
the upper and lower ends.
m
HDMI CONNECTION
v
VIDEO PRIORITY MODE
Setting Values
Description
COMPONENT
Set to this value for output at a resolution
of “480p” or higher from the
[COMPONENT VIDEO OUT] terminal.
HDMI
Set to this value when priority is to be
given to the “HDMI OUTPUT
RESOLUTION” setting.
Memo:
v
During data output from the [HDMI] terminal, setting to
“COMPONENT” automatically outputs data in the
“COMPONENT OUTPUT” setting. Setting to “HDMI”
outputs data in the “HDMI OUTPUT RESOLUTION” setting.
v
During data output from the [HDMI] and [COMPONENT
VIDEO OUT] terminals, setting to “COMPONENT”
automatically outputs data in the “COMPONENT OUTPUT”
setting. Setting to “HDMI” outputs data at the “480i”
resolution from the [COMPONENT VIDEO OUT] terminal.
v
When there is no output from the [HDMI] terminal, data is
automatically output in the “COMPONENT OUTPUT”
setting from the [COMPONENT VIDEO OUT] terminal.
v
HDMI OUTPUT RESOLUTION
Setting
Values
Description
AUTO
Automatically selects an appropriate
resolution according to the connected
device.
480p
Fixes the resolution at 480p.
1080i
Fixes the resolution at 1080i.
720p
Fixes the resolution at 720p.
1080p
Fixes the resolution at 1080p.
Memo:
v
When the resolution is set to “720p”, videos are output at
“1080i” other than those recorded at “720p” even though
“720p” is shown on the display.
v
Depending on the conditions (monitor type 16:9,resolution
“720p” and above, aspect 4:3), some of the OSD display of
the component output may be cut off. In this case, set
“VIDEO PRIORITY MODE” to “COMPONENT”.
OSD of the [VIDEO OUT]/[S-VIDEO OUT] terminals may
be cut off with the above conditions even when
“COMPONENT” is selected. In this case, set the
component resolution to “480p” or below, or set the monitor
type to other settings except 16:9.
v
BD-VIDEO 24p OUT
Setting
Values
Description
OFF
Outputs in the resolution set by “HDMI
OUTPUT RESOLUTION”.
ON
Outputs 24p elements at 24p.
Memo:
v
24p playback is possible for commercially available BD-
Videos or BDMVs that are recorded in 24p. Content other
than BDMVs that is dubbed or recorded on this unit at 24p,
as well as 24p content on SD cards are played back at 60p
or 60i.
v
This is applicable for BD-ROM and DVD-Video titles.
This is available when connected to a 24p compatible
monitor.
v
Elements other than 24p ones are output at 60p.
v
No video images will be output from the video, S-video and
component outputs when the HDMI output resolution is at
1080/24p.
Settings Menu
80
Содержание 1010MTH-SW-MT
Страница 103: ...103 ...
