ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Getting Started
1
Acknowledge the crossover type and cancel the
demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set
to
[YES]
, see page 6), the display shows: “2-WAY X ’ OVER” or “3-WAY
X ’ OVER” “PRESS” “VOLUME KNOB” “TO CONFIRM”.
1
Press the volume knob to acknowledge the current crossover type.
• To change the crossover type, see “Change the crossover type” on
page 7.
Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.
2
Press the volume knob again.
[YES]
is selected for the initial setup.
3
Press the volume knob again.
“DEMO OFF” appears.
2
Set the clock and date
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3
Turn the volume knob to select
[CLOCK ADJUST]
, then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of “Hour” “Minute”.
5
Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6
Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
To set the date
7
Turn the volume knob to select
[DATE FORMAT]
, then press the knob.
8
Turn the volume knob to select
[DD/MM/YY]
or
[MM/DD/YY]
, then press
the knob.
9
Turn the volume knob to select
[DATE SET]
, then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of “Day” “Month” “Year” or “Month” “Day”
“Year”.
11
Press and hold
to exit.
To return to the previous setting item, press
.
3
Set the other optional settings
You can only set the following items while the unit is in STANDBY source.
1
Press
B
SRC repeatedly to enter STANDBY.
2
Press the volume knob to enter
[FUNCTION]
.
3
Turn the volume knob to select an item (see the following table), then
press the knob.
4
Repeat step 3 until the desired item is selected/activated.
5
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[AUDIO CONTROL]
[SWITCH PREOUT]
For
:
(Applicable only if
[X’OVER]
is set to
[2WAY]
.) (Page 7)
[REAR]
/
[SUB-W]
: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier). (Page 32)
KDC-BT760DAB_X_B5A-3895-00_EN_1st Draft.indd 5
KDC-BT760DAB_X_B5A-3895-00_EN_1st Draft.indd 5
8/2/2021 5:35:18 PM
8/2/2021 5:35:18 PM
