40
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Troubleshooting
Symptom
Remedy
CD/USB/iPod
The iPod/iPhone does not
turn on or does not work.
• Check the connection between this unit and iPod/iPhone.
• Disconnect and reset the iPod/iPhone using hard reset.
“LOADING” appears when
you enter search mode by
pressing
.
This unit is still preparing the iPod/iPhone music list. It
may take some time to load, try again later.
“NO DISC”
Insert a playable disc into the loading slot.
“TOC ERROR”
Make sure the disc is clean and inserted properly.
“NA FILE”
Make sure the media (disc/USB) contain supported audio
files. (Page 37)
“COPY PRO”
A copy-protected file is played (disc/USB).
“NO DEVICE”
Connect a device (USB/iPod/iPhone), and change the
source to USB or iPod USB again.
“NO MUSIC”
Connect a device (USB/iPod/iPhone) that contains
playable audio files.
“iPod ERROR”
• Reconnect the iPod.
• Reset the iPod.
• Press and hold
B
SRC to turn off the power. Turn the
power on again for error recovery.
“MEMORY FULL”
You have reached the maximum storage limit of your
iPod/iPhone.
Bluetooth®
No Bluetooth device is
detected.
• Search from the Bluetooth device again.
• Reset the unit. (Page 3, 4)
Bluetooth pairing cannot
be made.
• Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and
the Bluetooth device, then perform pairing again.
(Page 16)
Symptom
Remedy
Bluetooth®
Echo or noise is heard during
a phone conversation.
• Adjust the microphone unit’s position. (Page 16)
• Check the
[ECHO CANCEL]
setting. (Page 18)
Phone sound quality is poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
Phone call sound cannot be
heard from the car speakers.
• Press 6
IW
during a call to switch between hands-free
and private talk mode. (Page 17)
Voice calling method is not
successful.
• Use voice calling method in a more quiet environment.
• Reduce the distance from the microphone when you
speak the name.
• Make sure the same voice as the registered voice tag is
used.
Sound is being interrupted or
skipped during playback of a
Bluetooth audio player.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the
unit.
The connected Bluetooth
audio player cannot be
controlled.
• Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
“NOT SUPPORT”
The connected phone does not support Voice Recognition
feature or phonebook transfer.
KDC-BT760DAB_X_B5A-3895-00_EN_6th Draft.indd 40
KDC-BT760DAB_X_B5A-3895-00_EN_6th Draft.indd 40
1/14/2022 2:00:00 PM
1/14/2022 2:00:00 PM
