JUWEL S.p.A.
Certified EN ISO 9001:2000 - Via I° Maggio 3/E - 20010 - Vanzago (MI) Italy
Tel +39 02/9347441 Fax +39 02/93570804 P.IVA 00692460421
Prohibited partial reproduction also | © Juwel 2009
STARTING INSTRUCTIONS
All the safes, except the key-lock ones, are supplied with the door open. Insert the battery.
Press (E): the lock closes and OK lights up. Memorize your own combination-code by effecting the
change of the initial combination-code 0000. (see point C, by Normal Model)
The safes with EMERGENCY-KEY are supplied with the door closed. By using the key, open the
door and close the lock again. From then on, the key will need to be used only in emergencies (failures
of the electronic system, or forgetfulness of the combination-code). Insert the battery. Memorize your
own combination-code by changing the initial code 0000 (see point C, by Normal Model).
The safes with BLOCKING electronic combination-system are supplied with the door closed. By
using the key open the door, close the lock and remove the key. Insert the battery. Memorize your
own combination-code by changing the initial code 0000 (see point C, by Normal Model).
The safes with the RELEASE electronic combination-system are supplied with the door open.
Turn right the control wheel, open, insert the battery and check the working by following the operation
instructions. Memorize your own combination-code by changing the initial code 0000 (see point C, by
Normal Model).
Before closing, it is advisable to try with the door open the closing and opening-operations.
Furthermore, with a view to an optimal functioning of the safe, it is advisable to change the battery
once in a year, even if the BATTERY signal is not lit.
WALL SAFES
Before putting the safe into the wall, as well as in the event of treatment on the wall (hanging
with tapestry or wall-paper, dyeing, wet cleaning), the whole front-part of the safe must be
covered in order to protect and not to damage the keyboard, and in order to prevent water or other
things from entering the (eventual) key-hole and the chink between door and frame.
After the installation into the wall, the safe must be kept for few days with the door open, in
order to prevent the humidity (coming from the wall) from damaging the mechanisms.
FREE-STANDING SAFES
It is essential that they are fixed very firmly.
