JUWEL S.p.A.
Certified EN ISO 9001:2000 - Via I° Maggio 3/E - 20010 - Vanzago (MI) Italy
Tel +39 02/9347441 Fax +39 02/93570804 P.IVA 00692460421
Prohibited partial reproduction also | © Juwel 2009
TIME-DELAY MODEL
THE SAFE CAN BE OPENED ONLY AFTER A TIME OF DELAY PROGRAMMABLE FROM 00 TO 99
MINUTES. It is supplied with a time of delay of 1 minute.
A) HOW TO OPEN
1 -
Press (C), digit the Opening Code (initially 0000) and press (E). If after having pressed (C),
ERROR lights up (see Manipulation Warning on the General Notes), you can proceed all the same.
If the time of delay is other than 00, the lock does not open. OK blinks, the system is blocked. After
the programmed delay-time has elapsed, OK stops blinking (it remains lit) and you can hear an
acoustic signal (beep) indicating that you can proceed.
2 - Within 2
½
minutes, please repeat the opening-operation.
Press (C), digit the Opening Code and press (E).
B) HOW TO CLOSE : Press (E)
If an obstacle hinders the closing, ERROR blinks and the bolts open themselves again.
Remove the obstacle and press again (E).
C) HOW TO CHANGE THE OPENING CODE
OPEN DOOR, BOLTS WITHDRAWN OUTSIDE THE DOOR (closed lock).
1 -
2 -
Open (as per point A). OK lights up for 6 sec.
Before OK switches itself off, press (C) and HOLD PRESSED until CHANGE lights up.
3 - Digit the New Code (from 3 to 8 digits) and press (E).
4 - Once again, for confirmation press: New Code, (E). OK lights up.
5 - Before closing the door, check the new code (close and open).
If an obstacle hinders the closing, ERROR blinks and the bolts open themselves again.
Remove the obstacle and press again (E).
D) HOW TO PROGRAMME THE TIME OF DELAY
OPEN DOOR, BOLTS DRAWN OUTSIDE THE DOOR (closed lock).
1 -
2 -
Open (as per point A). OK lights up for 6 sec.
Before OK switches itself off, press (C) and HOLD IT PRESSED until CHANGE lights up.
3 - Press (E), digit the time of delay desired (always 2 digits: 00…99), and press (E). The 2 digits
from 00 to 99 indicate the minutes of delay.
