Juta CM5024Z, Инструкция по установке и эксплуатации, Страница: 9 / 11

JUTA Solar Charge Controller Model :CM5024Z
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
load circuit has been disconnected. Use the solar panels recharge the ba
or charger when the battery voltage reaches LVR voltage, the controller
resume on the load power supply, into the normal working state.
ttery
verload Protection and Treatment:
g expressed load
s than 1.5times rated current, the controller has entered
will
O
Screen display (see the figure) and flashin
loop circuit current
sustained 60second
into overload protection state. After reduce the load, press the button to
restore power to the load.
Short Circuit Protection and Treatment:
d flashing
he
the
Screen display (see the figure on the right) an
expressed there is short circuit on the load loop circuit. T
controller has enter into Short Circuit Protection state Check
load if there is damage or not, if there is cable short circuit or not,
after trouble shooting short press the buttonfor restoration.
Solar Panel Fault and Treatment
Symbol flashing represent the controller was not detected solar panels
with
solar panel, check if there is an open circuit
hing, that indicate the load impulse current is more than
. Quality Assurance
carried out according to the following rules:
in 24hours. Check if
there is a connection from
between solar panels with controller.
Load Shock Fault
Open load if the flas
twice rated current of the controller. The controller is restarting the load in
action many timers do.
5
1. Quality assurance should be