Juta CM5024Z, Инструкция по установке и эксплуатации, Страница: 3 / 11

JUTA Solar Charge Controller Model :CM5024Z
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Introduction
CM series controller is a kind of intelligent, multi-purpose solar charge and
discharge controller. The family use the fixed LCD display, with a very friendly
interface; various control parameters can be flexibly set, fully meet your
various application requirements.
CM series controller has following features:
1
、
Image of LCD graphic symbol
2
、
Simple button operation
3
、
Automatic Temperature Compensation
4
、
Adjustable charge-discharge control parameters
5
、
Accumulated function of charge and discharge Ampere hours
6
、
Automatic Identification System Voltage level
7
、
Intelligent PWM charge mode
8
、
Settable Operating mode of Load
9
、
Overload, Short Circuit Protection
10 、 Remote monitoring and control function (custom)
11
、
Battery reverse-discharge protection
12
、
Battery Low Voltage Disconnection (LVD)
13
、
Battery reverse connection protection
14
、
Accumulated function of charge and discharge Ampere hours
2. Installation
Install
1
、
Ready tools and cables. Encourage you to matching the right cables.
Ensure that the current density 4mm that is conductive to reducing the line
voltage drop.
Recommended: 50A with 16mm cable.
Check weather the installation sites compliance with the relevant safety
requirements. Please avoid the damp, dusty, there is a place flammable,
explosive and corrosive gases use the controller to install.