Juta CM5024Z, Инструкция по установке и эксплуатации, Страница: 6 / 11

JUTA Solar Charge Controller Model :CM5024Z
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ningbo Star Solar Co.,Ltd Tel:(86) 574 26266608 Fax:(86) 574 26266618 56664636 Email:Sales@pvsolarchina.com Http://www.pvsolarchina.com
This is the Main interface. Use the button could in turn visit the following
parameters interface.
3.1 Battery Voltage of View
As shown on the right, displays the value for
current battery voltage. This interface (based
interface) displays charge status, discharge status,
battery capacity and battery voltage.
3.2 The load on/off control
View the interface in the battery voltage could be
used key On, off the load. In other interface,
The key there is no such feature.
3.3 Environment Temperature of View
As shown on the right, displays the ambient temperature of the controller,
the value used for temperature compensation on LVD function. The sensor
Must be plug in before using the controller.
3.4 Solar Panel charging current of View
As shown on the right, display the value of charging current from solar panel.
3.5 Load discharging current of View
As shown on the right, display the value of discharging
current for Loads.
3.6 View the Accumulated charging power (Ah) by solar panel
And back to zero
As shown on the right, display the accumulated charging power
from solar panel(Total ampere hour), long press the button more than
5seconds, The value will back to zero.
3.7 View the Accumulated discharging power (Ah) by Load and