3. Front Post and Tension Control Knob Installation Installation
Remove six Bolts M8*20 (31) ,six Spring Washers
Ø8(32), six Big Washers Ø8* Ø20*2.0 (19) from the
Main Frame (1).
Slide the Front Post Cover (22) onto the tube of the
Front Post (2).
Connect the Sensor Wire (39) from the Main Frame
(1) with the Sensor Wire (21) from the Front Post
(2).
Put the cable end of resistance cable of Tension
Control Knob (102) into the spring hook of Tension
Cable (103) as shown in drawing C of figure 3. Pull
the resistance cable of Tension Control Knob (102)
up and force it into the gap of metal bracket of
Tension Cable (103) as shown in drawing D of
figure 3.
Attach the Front Post (2) onto the Main Frame (1)
with six Bolts M8*20 (31) ,six Spring Washers
Ø8(32), six Big Washers Ø8* Ø20*2.0 (19) that
were removed .
4.Left/Right Swing Tube Installation
Remove two Bolt M8*20 (31), two Spring
Washers Ø8(32),two big washers Ø19*
Ø38*3.0(34),two Ø19* Ø29*0.5 Wave Spring
Washers(37) and two Ø8* Ø25*2.0 Big
Washers(54) from Front Post (2).
Pls note coat the Front Post with Grease.
Attach the
Left Swing Tube (3) onto the Front
Post (2) with one Bolt M8*20 (31), one Spring
Washer Ø8(32), one big washer Ø19*
Ø38*3.0(34), one Ø19* Ø29*0.5 Wave Spring
Washer(37) and one Ø8* Ø25*2.0 Big
Washer(54) that were removed.
Attach the
Right Swing Tube (4) onto the Front
Post (2) with one Bolt M8*20 (31), one Spring
Washer Ø8(32), one big washer Ø19*
Ø38*3.0(34), one Ø19* Ø29*0.5 Wave Spring
Washer(37) and one Ø8* Ø25*2.0 Big Washer(54) that were removed.
