Just Add Sharks Blacknose A3, Руководство пользователя

Страница: 12 / 50

1. Identify the left and right sides of the stand - the angled end of the top
bars is at the front of the stand
2. Use the hex bolts and washers to attach the cross bar to the left and
right sides of the stand
3. Engage the wheel locks to steady the stand
4. Carefully lift the cutter onto the work stand, taking care to align the feet
with the tops of the left and right sides of the stand
5. Once the laser is on the stand, the wheels may be unlocked to move the
unit, but should be re-engaged when in position
6. The laser should be situated on a firm level surface, in a location where
there is access to:
a. Mains power outlet
b. Extraction vent
●
Caution: lifting the laser cutter requires two people. It is helpful to have a
third person assist with aligning the feet when placing the cutter on the
work stand.