Elektroapparate AG
Technical information
Technical Support
Language
EN
Z6 One Touch TFT
Author: Patrik Studer
Checked:
Approved:
Docu.-name:
Technische_Informationen_Z6_OT_TFT_EN.docx
L:\Geräte\Linie_Z_Neu\Z6_OT_TFT\Schulungsunterlagen\E\T
echnische_Informationen_Z6_OT_TFT_EN.docx
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
30.04.2015
Page 15/16
12
Empty system:
Frost protection
Precondition:
PLEASE SELECT PRODUCT
is displayed.
1.
Press the 1 PORTION MILK FOAM button
2.
1 PORTION MILK FOAM, hot steam is discharged from the dual spout
3.
Remove and empty the water tank
4.
Turn the Rotary Switch until AMOUNT OF MILK FOAM / 60 SEC. is displayed
5.
Steam will continue to be discharged from the dual spout until the system is empty
FILL WATER TANK
6.
Press the On/Off button and your Z6 is switched off
13
Prepare appliance for resale:
Procedure:
All products will be reset to factory settings and the fluid system is empty due to protection against frost.
The appliance asks the customer for the desired language and afterwards it will fill the system with water.
Initial position:
The appliance is fully working.
1.
Switch on appliance until the message in the display appears
PLEASE SELECT PRODUCT
2.
Go into the program to
MACHINE SETTINGS/FACTORY SETTING
3.
The display shows SAVED and appliance switches-off automatically
4.
Empty system according to manual:
Press the
1 PORTION MILK FOAM
button
1 PORTION MILK FOAM
, hot steam is discharged from the dual spout
Remove and empty the water tank
Turn the Rotary Switch and wait until the system is empty
FILL WATER TANK
Switch-off appliance
5.
Switch on again the appliance (no water in water tank, display message
FILL WATER TANK
)
6.
Press key combination
key 1
(ESPRESSO) &
key 6
(1 PORTION MILK FOAM) at the same time
until
SAVED
shows up
7.
Switch off appliance
If beforehand an exit diagnosis had been made, one can start right away with step 5.
