Elektroapparate AG
Technical information
Technical Support
Language
EN
Z6 One Touch TFT
Author: Patrik Studer
Checked:
Approved:
Docu.-name:
Technische_Informationen_Z6_OT_TFT_EN.docx
L:\Geräte\Linie_Z_Neu\Z6_OT_TFT\Schulungsunterlagen\E\T
echnische_Informationen_Z6_OT_TFT_EN.docx
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
30.04.2015
Page 14/16
11.3.7
Water hardness:
Is always enabled, in descale mode or filter mode
The water hardness level can directly be programmed in German hardness (1 °dH – 30 °dH).
INACTIVE not possible.
Steam will also be calculated with an internal factor
To perform the appropriate maintenance programme prompt, you have go into the
MAINTENANCE SETTING (1/3)
During the switch-ON rinse, the water flow will be monitored.
If this flow is insufficient, the measurement will be done twice again.
If it is still not ok, then the descale message will be set.
That means, the message may appear before the calculated amount of water.
Activating of this feature is always 5 litres after an ordinary descale procedure.
Level
°dH
AQUADUR
°dH
Liters
Display
(When reached water level)
Disabling is not possible
1
1-7
5 ... 10
200
DECALCIFY MACHINE
2
8-15
10 ... 15
90
DECALCIFY MACHINE
3
16-23
15 ... 20
60
DECALCIFY MACHINE
4
24-30
20 ... 25
40
DECALCIFY MACHINE
Conversion factors:
1 °dH = 1.25 °e
= 17.86 ppm (CaCO
3
) = 1.78 °f
11.3.8
Water tank illumination:
11.3.8.1
Permanent:
The water tank is always illuminated
11.3.8.2
Temporary:
The water tank is only illuminated when a product is being prepared
11.3.9
Product counter:
Total number of coffee preparations
Each single product inclusive steam (milk) and hot water
11.3.10
Maintenance counter:
Total numbers of: Cleaning / Descaling / Changing the filter / Milk system cleaning
11.3.11
Version:
Read software version (Main/Display)
