Jura Z10 759, Инструкция по эксплуатации

Страница: 23 / 40

6 Machine settings
23
6 Machine settings
Press the Rotary Switch to open the Cockpit� In the ‘Machine
setting’
f section, you can make the following settings:
Programme item Explanation
‘Smart mode’ Arrange products by preparation frequency on the start screen after a
certain amount of time (the
h symbol in the Cockpit shows that ‘Smart
mode’ is activated)
‘Product name’ Display product images with/without product names on the start screen
‘Add start screen’ Define number of start screens (1–4)
‘Number of
products’ Set the number of products on the start screen: 2 products, 5 products or
automatic (‘Smart mode’)
‘Wi-Fi connection’ Z10 connect wirelessly with the JURA app (J�O�E�
®
) or disconnect again (see
chapter 3 ‘Preparing and using for the first time – Establishing a WiFi
connection’)
‘Switch off after’ Set the automatic switch-off time to save energy (switch-off after
15 minutes, 30 minutes or 1 – 9 hours after the last action on the
machine)
‘Choose language’ Set language
‘Factory setting’ Z10 Restore factory settings (your Z10 will switch off after this)
‘Water hardness’ Set the hardness of the water used (1 °dH to 30 °dH) to prevent
calcification of your machine�
‘Units’ Set the unit for the amount of water (ml or oz)
‘Information’ View software version
‘Connect accessory’ Wirelessly connect your Z10 with your JURA app (J�O�E�
®
) or with the Cool
Control milk cooler, or disconnect again
‘Display’ Change display brightness (in 10% increments)
‘Empty system’ Empty the system to protect the Z10 from frost during transport (see
chapter 10 ‘Transport and environmentally friendly disposal – Transport /
Emptying the system’)
‘Product counter’ View product counter
‘Maintenance
counter’ View the maintenance counter