Jura IMPRESSA Z5, Руководство пользователя

Страница: 66 / 112

66
7 Maintenance
If you want to descale the machine at a later point in time, turn
the Rotary Switch until
DECALCIFYING
/
START NO
is displayed. Exit the maintenance programme by pressing
the Rotary Switch. The prompt ‘Descale machine’ remains on
the display.
c T
Press the maintenance button.
TRAY
/
GROUNDS EMPTY
Empty the drip tray and coffee grounds container and put
them back into the machine.
SOLVENT IN TANK
Remove the water tank and empty it.
Completely dissolve the contents of one blister (3 JURA
descaling tablets) in a container that holds 600 ml of water.
This may take several minutes.
Pour the solution into the empty water tank and insert it in
the machine.
SOLVENT IN TANK
/
PRESS BUTTON
, the main-
tenance button
c
lights up.
Remove the cappuccino nozzle.
Place a receptacle under the hot water spout and the con-
nector of the nozzle.
c T
Press the maintenance button.
MACHINE IS DECALCIFYING
Water flows from the hot water spout and the connector of
the nozzle. The maintenance button
c
blinks during the
descaling operation.
The process stops automatically,
TRAY
/
GROUNDS
EMPTY
.
Empty the receptacles below the hot water spout and the
connector of the nozzle.
Empty the drip tray and coffee grounds container and put
them back into the machine.
WATER TANK FILL
Remove the water tank and rinse it thoroughly.
Fill the water tank with fresh, cold mains water and rein-
sert.
PRESS BUTTON
, the maintenance button
c
lights up.
E
T
T
T
T
T
T
T
T
T
T