25
3 Preparation at the touch of a button
T
Place a glass under the frother.
E
If you are using the
Professional Cappuccino Frother,
set the
selector switch to the Milk Foam position
p
.
q T
Press the Latte Macchiato button.
LATTE MAC.
and the coffee strength are displayed.
The milk foam is then prepared. The operation stops auto-
matically when pre-set amount of milk is reached.
E
A brief pause follows during which the hot milk separates from
the milk foam. This enables the formation of the typical layers
of a latte macchiato. The duration of this pause can be defined
in programming mode.
Coffee preparation then begins. The pre-set amount of
water flows into the glass. Preparation stops automatically.
ENJOY
appears on the display.
COFFEE READY
is then
displayed.
To ensure that the frother works perfectly, you should rinse and
clean it regularly. The description for this can be found in Chapter 5
‘Maintenance – Cappuccino frother’.
You can choose a second coffee blend, for example decaffeinated
coffee, with the filler funnel for pre-ground coffee.
E
Never add more than two level measuring spoons of pre-
ground coffee.
E
Use pre-ground coffee which is not ground too finely. Very
fine coffee can block up the system so that the coffee only
comes out in drips.
E
If you did not fill the machine with a sufficient amount of pre-
ground coffee,
NOT ENOUGH PRE-GROUND
is displayed
and the IMPRESSA stops operation.
All coffee specialities with pre-ground coffee are prepared following
this model.
Example
: This is how to prepare a cup of coffee using pre-ground
coffee.
T
Place a cup under the coffee spout.
Pre-ground coffee
