7
3.2 Check electrical fuse
The coffee machine is designed for an electric current of 10
Ampères. Check if the electrical fuse has sufficient capacity.
3.3 Refill water
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
Take out the water tank and thoroughly rinse it with cold tap
water (Fig. 1).
Then fill the water tank and re-install it in the coffee machine.
Make sure the tank is installed correctly and that it engages
properly.
3.4 Filling the bean tank
Open the cover of the bean tank (10).
Remove any dirt or foreign matter from the bean tank.
Fill coffee beans in the bean tank and close the cover.
3.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend that you use
a fine adjustment
(the smaller the dots, the finer the
grinding is) for a light roast
a coarse adjustment
(the bigger the dots, the coarser the
grinding is) for a dark roast
The grinding degree may only be adjusted while the grinding
gear is running.
Open the cover of the bean tank (10).
To adjust the grinding degree turn the rotary switch (Fig. 2) to
the required position.
4. First use
Fill coffee beans in the bean tank (10).
Fill water tank.
Switch
on
your coffee machine using the key
.
WWW.IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
FILL SYSTEM / WATER PORTION
Place an empty cup under the hot water nozzle (15).
Press water portion draw-off key
SYSTEM FILLING
MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press symbol
.
COFFEE NORMAL
If FILL BEANS is displayed, touch the symbol
again. The mill was still empty.
To get an excellent froth, adjust the coffee spout (16) to the
size of your cup (Fig. 3 ).
E
