background image

20

19. Messages

Cause

Action

FILL WATER

Water tank is empty

Top up with water

Water level indicator in tank is jammed

Empty tank, rinse out, fill up and replace

Tank is calcified, water level indicator is stuck

Remove tank, decalcify, rinse well, fill up with water
and replace

FILL BEANS

Bean container is empty

Top up with beans

Message still displayed, although beans filled

Draw off cup of coffee. FILL BEANS message only 
disappears after coffee is drawn off

A foreign object is stuck in the grinder

Remove foreign object as described in chapter 13.5 
“Removing foreign objects“

EMPTY GROUNDS

Coffee grounds container is full

Remove drip tray, empty grounds container, replace 
tray

Message still displayed although grounds 

The tray was out of the machine for less than 8 sec 

container emptied.

for emptying. Take tray out again for approx. 10 sec 
and replace

The message appears after only a few cups have 

Leave the machine switched on while the grounds 

been drawn off

container is being emptied. The counter is only reset 
to zero if the machine is left switched on

TRAY MISSING

Tray has not been replaced correctly

Insert tray correctly

Grounds have fallen under tray and are preventing

Remove tray, clean inside of machine, replace tray

it from being correctly inserted

EMPTY TRAY

The residual water container is full

Remove container carefully, empty, rinse out and 
replace

Message still displayed, although container 

Remove container, clean metal contacts 

emptied

(please refer to chapter 13.8)

Содержание IMPRESSA 601























Отзывы: