background image

12

With the flow-adjustment you can set the optimum frothing.
Turn the handle slightly to the right or to the left until you
obtain the required result.

11.3 Drawing off hot milk using 

the Auto-Cappuccinatore S9

The Auto-Cappuccinatore of the S9 can be used to draw off hot
milk. Adjust the selector lever (1) (Fig. 10) to position (3) to draw
off hot milk. 

Install the Auto-Cappuccino. This is included in your
Welcome Pack.

11.4 Drawing off cappuccino using 

the Auto-Cappuccintore S9

The Auto-Cappuccinatore of the S9 can be used to draw off capuc-
cino. Adjust the selector lever (1) (Fig. 10) to position (2) to draw
off capuccino. 

11.5 Controlling the temperature using 

the Auto-Cappuccinatore S9

Adjust the selector lever (1) to 

for hot milk/cappuccino or  for

less hot milk/cappuccino. Individual fine adjustment is possible.

11.6 Cleaning the Auto-Cappuccinatore

Remove Auto-Cappuccinatore (21). If you do not achieve
optimum results, disassemble the flow controller and the
selector lever (Fig. 10 for S9). Thoroughly rinse these parts
with water. 

As soon as you have frothed enough milk, it is important to clean
the Auto-Cappuccino.

-

+

Fill water in a jug and immerse the intake-tube in the water. Now
draw off steam until the water/steam mixture flowing into your cup
is completely clean. Your Auto-Cappuccino is clean again.

12. Switching off machine

When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under
the coffee-spout (15) and press ON/OFF key 

. When the rinsing

water has run into the container, the machine powers down. Dis-
card the water.

13. Programming

Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).

The following settings can be programmed:

Powder quantity

Coffee temperature 

Water quantity

Steam portion

Tea portion

Filter

Water hardness

Economy mode

Timer clock

Automatic switch on time

Automatic switch off time

Supplies and cup counter

Language selection

Содержание IMPRESSA 601























Отзывы: