Jura GIGA X8 Professional, Инструкция по эксплуатации

Страница: 32 / 58

32
4 Permanent settings in programming mode
In the program item ‘Machine settings’ / ‘Save energy’ you can set
an energy-saving mode:
U
‘1’
U
Soon after the last preparation, the GIGA stops heating up.
After approximately 5 minutes, the ‘ESM’ symbol (E.S.M.
© ,
Energy Save Mode) is displayed.
U
Before you can prepare a specialty coffee, specialty coffee
with milk, or hot water, the machine must heat up.
U
‘0’
U
All specialty coffees, specialty coffees with milk and hot
water can be prepared without having to wait.
Example: Proceed as follows to switch energy-saving mode off.
Precondition: The start screen is displayed.
T Touch ‘ P ’ .
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Machine settings’
T Press the Rotary Switch.
‘Switch off after’
T Move your finger across the display until ‘Save energy’ is
displayed in the center.
T Touch ‘Save energy’ .
‘Save energy’
T Now move your finger across the controller and set it to ‘0’ .
T Touch ‘Save’ .
‘Saved’ appears briefly on the display.
‘Save energy’
T Touch ‘Back’ the number of times needed to display the
start screen again.
In the program item ‘Machine settings’ / ‘Lock/enable’ you can
disable/enable the following settings:
U
‘One-off settings’ : One-off settings can be made during
preparation (e.g. coffee strength or amount of water).
U
‘Expert mode’ : You can access the product settings by
touching a product for approximately 2 seconds.
Energy-saving mode
Enabling and disabling
functions