Jura GIGA X8 Professional, Инструкция по эксплуатации

Страница: 27 / 58

27
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
espresso.
Precondition: The start screen is displayed.
T
Touch ‘Espresso’ for
approximately 2 seconds
until the list
of possible settings is displayed.
T
Touch ‘Product settings’ .
‘Espresso’
T
Move your finger across the display until ‘Coffee strength’ is
displayed in the center.
T
Now move your finger to the left or right to change the set-
ting for the coffee strength.
T
Touch ‘Save’ .
‘Saved’ appears briefly on the display.
T
Touch ‘Back’ to return to the start screen.
In the program item ‘Product settings’ / ‘Set consistency of grind’
you can adjust both grinders separately to the degree of roast of
your coffee.
The consistency of grind is correct if the coffee flows regularly from
the dual spout. In addition, a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition: The start screen is displayed.
Adjusting the product
settings
J WARNING
Setting the consistency
of grind