background image

28

ENA X1

Proper use

This machine has been designed and built for 
domestic and similar use, e.g. for customers in 
hotels, motels and other residential facilities. It 
should only be used to prepare coffee and to heat 
water. Use for any other purpose will be deemed 
improper. JURA Elektroapparate AG cannot accept 
any responsibility for the consequences of 
improper use.

Before using the machine always carefully read 
and comply with all these instructions. Keep this 
manual close to the ENA and pass it on to the 
next user if applicable.

For your safety

Please read and note the following important 
safety information carefully.
This can prevent potentially fatal injury due to 
electric shock:

Never use a machine which has been 
damaged or which has a defective power 
cable.
If there are any signs of damage, for example 
if there is a smell of burning, unplug the 
machine from the mains supply immediately 
and contact the JURA service centre.
If the power cable for this machine is 
damaged, it must be repaired either directly 
by JURA or by a JURA approved service centre.
Make sure that the ENA and the power cable 
are not located close to hot surfaces.
Be careful to ensure that the power cable 
does not become trapped and does not rub 
against sharp edges.
Never open and repair the machine yourself. 
Do not modify the machine in any way that is 
not described in the ENA manual. The 
machine contains live parts. If opened, there 
is a danger of fatal injury. Repairs may only be 
carried out by JURA approved service centres, 
using original spare parts and accessories.

Z

Z

Z

Z

Z

Z

There is a risk of scalds and burns from the spouts 
or the nozzle:

Place the machine out of the reach of 
children.
Do not touch any hot parts. Use the handles 
provided.
Be careful to ensure that the appropriate 
nozzle is correctly installed and clean. The 
nozzle or parts of the nozzle could become 
detached if the parts are not assembled 
correctly or a blockage occurs.

A defective machine is not safe and could cause 
injury or fire. To avoid damage and any associated 
risk of injury or fire:

Never allow the power cable to hang down 
loosely. The power cable could trip someone 
or be damaged.
Protect your ENA from environmental 
influences such as rain, frost and direct 
sunlight.
Do not put the ENA, cable or connections in 
water.
Do not put the ENA or any individual parts in 
the dishwasher.
Turn your ENA off and disconnect the mains 
plug before starting any cleaning operation. 
Always wipe your ENA with a damp cloth, 
never a wet cloth, and protect it from 
constant water splashes.
Only connect the machine to a power supply 
in accordance with the information on the 
rating plate. The rating plate is located on the 
underside of your ENA. Further technical  
data is given in Chapter 8 ‘Technical data’.
Use only original JURA care products.  
Use of products that are not explicitly 
recommended by JURA could damage  
the ENA.
Do not use any coffee beans treated with 
additives or caramelised coffee beans.
Always fill the water tank with cold, fresh 
water.
If you are absent for a prolonged period of 
time, turn the machine off.

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Z

Содержание ENA X1























Отзывы: