19
5 Maintenance
pt
es
nl
it
fr
ru
en
de
E
If the descaling agent comes into contact
with sensitive surfaces (e.g. marble), damage
cannot be ruled out. Clean up any splashes
immediately.
Precondition:
Your ENA is ready for use. The
Descaling symbol
&
lights up.
&
T
Touch the Descaling symbol
for approxi-
mately 2 seconds.
The Coffee Grounds Container symbol
?
lights up.
T
Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbol
M
flashes.
T
Remove and empty the water tank.
T
Completely dissolve the contents of one blis-
ter (three JURA descaling tablets) in a
receptacle holding 17 oz (500 ml) of water.
This may take several minutes.
T
Pour the solution into the
empty
water tank
and reinsert the tank.
The Descaling symbol
&
lights up.
&
T
Touch the Descaling symbol.
The
Y
,
<
,
>
and
&
symbols flash, water
flows directly into the drip tray.
The operation is interrupted, the Coffee
Grounds Container symbol
?
flashes.
T
Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbol
M
lights up.
T
Remove the water tank and
rinse thor-
oughly.
T
Fill the water tank with fresh, cold water and
reinsert it.
The Descaling symbol
&
lights up.
&
T
Touch the Descaling symbol.
The
Y
,
<
,
>
and
&
symbols flash, water
flows directly into the drip tray.
The
Y
,
<
and
>
symbols flash, water flows
out of the drip tray.
The operation is interrupted, the Coffee
Grounds Container symbol
?
lights up.
T
Empty the drip tray and coffee grounds
container and reinsert them.
Your ENA is once more ready for use.
E
If the descaling operation stops unexpect-
edly, rinse the water tank thoroughly.
Descaling the machine without a prompt:
You
can initiate the 'Descaling the machine' operation
manually at any time as long as the machine is
ready for use. Touch the
;
and
_
symbols
simultaneously for approx. 2 seconds.
The
;
,
_
,
L
and
&
symbols light up brightly. Continue with
the
first prompt
(indicated by
T
) as described in
this section.
Changing the filter
E
After 2000 oz (60 liters) of water have flowed
through, the filter will cease to work. Your
ENA will automatically prompt you to
change the filter.
E
After three months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E
If the CLEARYL Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:
Your ENA is ready for use. The Filter
symbol
!
lights up.
!
T
Touch the Filter symbol
for approximately
2 seconds.
The Water Tank symbol
M
lights up.
T
Remove the water tank.
T
Open the filter holder and remove the old fil-
ter cartridge.
