Jura ENA 5, Инструкция по эксплуатации

Страница: 28 / 40

28
ENA 5
l T
Turn the switch to position
m
.
DE-SCALING
, water flows out of the
Connector System © several times.
CLOSE TAP
y T
Turn the switch to position
o
.
DE-SCALING
, the descaling operation
is continued.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
Empty the receptacle and place it under the
Connector System
©
once more.
FILL WATER TANK
Remove the water tank, rinse thoroughly,
fill with fresh, cold water and replace the
tank.
OPEN TAP
l T
Turn the switch to position
m
.
DE-SCALING
, water flows out of
the Connector System
©
several times.
The process is interrupted.
CLOSE TAP.
y T
Turn the switch to position
o
.
DE-SCALING
, the descaling operation
is continued.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
Reattach the nozzle to the Connector
System
©
.
READY
Descaling the machine – manually
The ‘Descale machine’ operation can be manually
initiated.
Precondition :
READY
appears on the display.
Open the cover behind the Rotary Switch.
P T
Press the P button until
RINSE
appears.
k T
Press the Rotary Switch to enter the
programme item.
RINSE
T
T
T
T
T
T
g T
Turn the Rotary Switch until
DE-SCALE
is displayed.
k T
Press the Rotary Switch.
EMPTY TRAY
Continue with the third prompt to take
action (indicated by
T
), as described in the
section ‘ Descaling the machine following
a prompt’ .
Rinsing the Professional Cappuccino Frother
To ensure that the Professional Cappuccino
Frother works perfectly, you should rinse it with
water whenever you have prepared some milk.
The ENA will not prompt you to rinse the
Professional Cappuccino Frother.
Remove the milk pipe from the milk carton
or milk container.
Fill a receptacle with fresh water and
immerse the milk pipe in the water.
Place another receptacle under the nozzle.
Set the selector lever of the nozzle to the
milk foam
p
or milk
t
position.
g T
Turn the Rotary Switch until
STEAM
is
displayed.
k T
Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T
Turn the switch to position
m
.
STEAM
, the nozzle and pipe are rinsed.
y T
Turn the switch to position
o
as soon as
clean water flows into the receptacle.
T
E
T
T
T
T