Jura ENA 5, Инструкция по эксплуатации

Страница: 22 / 40

22
ENA 5
To ensure that the 2-stage frothing
nozzle works perfectly, it should be
rinsed regularly (refer to Chapter 4
‘Maintenance – Dismantling and rinsing
the 2-stage frothing nozzle’).
Hot water
To prepare hot water, attach either the hot
water nozzle or the 2-stage frothing nozzle
to the Connector System
©
.
CAUTION
There is a danger of scalding from hot water
splashes.
Avoid direct contact with the skin.
Precondition :
READY
appears on the display.
Place a cup under the nozzle.
l T
Turn the switch to position
m
.
WATER
, hot water flows into the cup.
y T
Turn the switch clockwise when there is
sufficient water in the cup.
READY
3 Default settings in programming
mode
Products
The following settings can be programmed for
1 coffee:
Amount of water:
15 ML
–
240 ML
Coffee strength:
MILD
,
NORMAL
,
STRONG
Temperature:
NORMAL
,
HIGH
The following applies when preparing 2 coffees:
The amount of water set for 1 coffee is
dispensed
per cup when 2 cups are prepared.
2 coffees are always prepared with the coffee
strength ‘mild’.
E
J
T
T
Z
Z
Z
Z
Z
2 coffees are prepared at the same tempera-
ture which is set for 1 coffee.
Default settings in programming mode always
follow the same model.
Example : Changing the default setting for the
strength of one coffee from
NORMAL
to
STRONG
.
Precondition :
READY
appears on the display.
Open the cover behind the Rotary Switch.
P T
Press the P button until
RINSE
appears.
g T
Turn the Rotary Switch until
PRODUCT
is
displayed.
k T
Press the Rotary Switch to enter the
programme item.
WATER
g T
Turn the Rotary Switch until
AROMA
is
displayed.
k T
Press the Rotary Switch to enter the
programme item.
NORMAL
g T
Turn the Rotary Switch until
STRONG
is
displayed.
k T
Press the Rotary Switch to confirm the
setting.
OK
, the coffee strength is then adjusted.
AROMA
g T
Turn the Rotary Switch until
EXIT
is
displayed.
k T
Press the Rotary Switch to exit the
programme item.
PRODUCT
g T
Turn the Rotary Switch until
EXIT
is
displayed.
k T
Press the Rotary Switch to exit program-
ming mode.
READY
Z
T