Jura Capresso Impressa 68193, Инструкция по эксплуатации и гарантия

Страница: 28 / 39

Example :
Set the On-time to 6:15 AM and program the S9OT not to turn
on automatically on Sundays.
COFFEE READY
• Push the Rotary Dial until the display shows MAINTENANCE .
• Turn the Dial until the display shows UNIT ON/OFF .
• Push the Dial UNIT ON --.-- , push again UNIT ON --.-- .
• Turn the dial to set the hours UNIT ON 6:00 AM and push the
Dial to confirm. UNIT ON 6:00 AM .
• Turn the Dial to set the minutes UNIT ON 6:15 AM and push
to confirm. CONFIRMED
✓
, then UNIT ON 6:15 AM .
• Turn the Rotary Dial until ON/OFF / MON YES is displayed
and push ON/OFF / MON YES .
• Turn the dial until ON/OFF / SUN YES is displayed and push
ON/OFF / SUN YES .
• Turn the dial until display shows ON/OFF / SUN NO and push
to confirm CONFIRMED
✓
and then ON/OFF / SUN NO .
• Turn the dial to EXIT and push. The display shows
ON/OFF / MON YES .
• Turn the dial to EXIT and push. COFFEE READY .
14.6 AUTO-OFF
The S9 OT is pre-set to turn itself off 5 hours after last use.
You can change the auto-off interval between 0.5 and 15 hours
or you can set the machine not to turn itself off.
Recommendations : If you only use the machine in the morning,
change the auto-off to 2 hours. If you use the machine all day
long, leave the auto/off as is. This way the machine is always
ready, and it is not necessary to turn it on and to warm up.
Example :
Change the auto-off from 5 hours to 2 hours after last use.
COFFEE READY .
• Push the Rotary Dial until the display shows MAINTENANCE .
• Turn the Dial until the display shows OFF AFTER 5 H .
• Push the Dial OFF AFTER 5 H .
• Turn the dial until display show OFF AFTER 2 H and push to
confirm. CONFIRMED
✓
, OFF AFTER 2 H .
• Turn the dial to EXIT and push. COFFEE READY .
14.7 RINSE SETTINGS
This program allows you to change both the Rinse cycle and the
Cappuccino Rinse cycle.
Rinse cycle ( INIT RINSE )
After turning the machine on with the On/Off button, the S9 OT
heats up and then prompts you to run a short rinse cycle
(chapter 8). You can re-program this function so that this rinse
cycle is done automatically.
Example:
Change the initial rinse cycle from manual to automatic:
COFFEE READY .
• Push the Rotary Dial until the display shows MAINTENANCE .
• Turn the Dial until the display shows RINSES and push the
dial. INIT RINSE MANUAL .
• Push the dial again, INIT RINSE MANUAL and turn to
INIT RINSE AUTO and push to confirm. CONFIRMED
✓
then INIT RINSE AUTO .
• Turn the dial to EXIT and push the dial RINSES .
• Turn the dial to EXIT and push COFFEE READY .
28.