Operating Instructions Nutrimix
10
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
H
I
J
K
L
M
N
H
Lid
I
Display module
J
Button
K
Battery (CR2032)
L
Decorative ring
M
Tamper housing
N
Temperature sensor
•
To activate/deactivate the temperature display, press the
button briefly.
•
To switch the temperature display between °C
°F
press the button for longer than 2 seconds.
Info:
The temperature display switches off automatically
after approx. 2 minutes.
Changing the battery
1
Screw the lid
H
off.
2
Carefully remove the display module
I
from the tamper
housing
M
.
Important:
Make sure that you do not pull out the
display module’s power supply cords or disconnect the
plug!
3
Remove the battery
K
on the underside of the display
module
I
from its holder. To do this press the tab on the
side outwards.
4
Insert the new battery (CR2032).
Important:
The positive pole of the battery (
+
) is visible.
5
Insert the display module
I
carefully back into the tam-
per housing
M
.
Important:
When installing note the coding of the dis-
play module and tamper housing.
6
Screw the lid
H
on.
Important:
Make sure that the power supply cords of
the display module do not get caught or jammed!
Control elements
The Nutrimix is controlled by a backlit, touch-sensitive
control panel. Tapping the symbols selects the relevant
function.
T
O
P
Q
R
S
O
ON/OFF
P
LCD display
Q
PULSE
R
Cleaning program
S
Program symbols
(
Program description
see Page 13)
T
Manual speed setting
ON/OFF
CAUTION Rotating parts can cause injury!
•
Never put your hand into the appliance when the motor
is running.
NOTE
Running the appliance while empty can
cause damage!
Never operate the appliance when empty. This can dam-
age the blade mount and/or seal.
•
After choosing a program or a speed setting, you can
start or stop processing by tapping .
•
In addition, the operating status is displayed via the
symbol :
Operating status
Flashes red
Energy-saving mode
Flashes red and touch
panel is backlit
Standby mode
Lights white
Appliance is running
LCD display
P
•
After plugging into the mains and tapping the back-
ground lighting on the LCD display lights up.
Standby mode, flashes red
•
In the left-hand part of the display (
speed
) the current
speed level (
1 - 10
) is displayed when the appliance is
running.
