JA95-N22 Audio Controller - Flight Crew - NVG
Installation and Operating Manual
Rev
B
Page 8
f) Plug in any remaining headsets, and check for correct ICS operation. Note that an incorrect cordset (drop cord)
or improper jack wiring may cause a wide range of problems, from loss of audio to a tone heard in the headset.
g) Check that all configurations settings are correct.
When all performance checks are satisfied, complete the necessary regulatory documentation before releasing the
aircraft for service. Refer to
2.5
Adjustments and Configuration using ProCS™
All the JA95-N22 internal adjustments are set from the
the JA95-N22 via the front panel connector (
♫
/io), using the configuration program and CAB-USB-0002 and
JA99 Configuration Cables.
For full information on the configuration process, refer to the
on the Jupiter Avionics website.
2.5.1
ProCS™ Setup
The JA95-N22 menu item 'ProCS Setup' provides a drawing showing the cabling arrangement (using the
JA99-001 and CAB-USB-0002) for connecting the JA95-N22 to a computer to allow configuration using ProCS™.
2.5.2
Configurable Settings
A standard unit is shipped from the factory with all internal adjustments configured to the default levels. At installation,
it may be desirable to change some of these settings to suit the local operating environment.
Within ProCS™, the configurable settings are grouped together into the following sections:
2.5.2.1
Front Panel Switches
The Front Panel Switches window is used to specify the text for each legend.
Note
: If the name of a front panel switch is changed using this software, the change will be incorporated in
every other section that refers to that switch name, including the connector maps, to give truly customized
installation diagrams.